661282
6
Zoom out
Zoom in
Previous page
1/7
Next page
RECALLING MEMORY
1. Press " MEMO" button to review the previous memory data.
The first display with the last 3 measurements data average.
MEMO
2. Repeated press "MEMO" button to continue review the memory
data in ascending order.
3. Press "ON/OFF" button to turn off device after completing data
review.
-9-
-10-
HOW TO MEASURE BLOOD PRESSURE
1. Set up the cuff to your upper arm as previous section of "How to
use the upper arm cuff".
2. Press the " ON/OFF " button, all icons appear two seconds on
LCD, and display "0" and the " " " "symbols.
ON/OFF
3. Squeeze the inflation bulb repeatedly to inflate the pressure to the
cuff up to around 150~200 mmHg (you will see the arrow symbol
change from " " to " "). stop pumping the air immediately.
(Note: If not inflate the pressure within 30 seconds, device will
display "E01" error and then turned off)
4. To wait the cuff decreasing pressure automatically, when it senses
the heart beat, the ( ) icon will flash on LCD.
5. After complete measurement the screen will display systolic,
diastolic value, and pulse/min value, meanwhile will automatically
store the data in memory.
Level indicator-
One bar for Systolic below 99 mmHg
Two bars for Systolic between 100 ~ 139 mmHg
Three Bars for Systolic between 140 ~ 159 mmHg
Four bars for Systolic above 160 mmHg
Irregular Heartbeat Detection(IHD)
During measurement, if the sensor detects more than twice
of Heartbeat out of 25% tolerance to your average Heart
rate, the display will turn on Irregular Heartbeat icon .
6. Press down the Exhaust Valve on the top of bulb to completely
deflate the remaining air pressure in the cuff.
Note: In some cases, if the result of measurement display
with Error message, please make sure release the cuff
pressure completely, then turn power off and on again,
and repeat from the step 3 to make a new measurement.
7. Press " ON/OFF" button to turn off the unit. (Even if you forgot to
turn off, the unit will turn off automatically in approximately 2.5
minutes)
Note:
* You should inflate the pressure up to about 30 mmHg
above your regular systolic pressure value, so as to get a
correct measurement result.
* The unit may store 100 measurement values, if more than
100 records, it will delete the earliest data.
* During measurement do not speak or shake as which may
affect the accuracy of the result.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bioland 2002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bioland 2002 in the language / languages: English as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info