496761
6
Zoom out
Zoom in
Previous page
1/10
Next page
Binatone Help Line - 0845 345 9677
Channel scan searches for active signals in an
for all 8 channels, 38 CTCSS codes or
3.9Activating the Auto Channel Scan
a.
Press the MENU
will flash on the LCD Screen with the channel number.
b. Press the UP or DOWN button to begin scanning
channels. When an active signal is detected, channel
scan pauses on the active channel.
c. Or Press the MENU button six times, the CTCSS
UP or DOWN
d. Or press the MENU button seven times, the SC and DCS
UPDOWN
e. P ress the PTT button to stop the scan.
You can send a Call-ring tone to other PMR users to give an
alert that you want to communicate with them.
Press the CALL button
You will hear a ring tone for about two seconds; the“TX
icon appears on the LCD Screen. Any other units within
the transmitting range and tuned to the same channel
and sub-channel (if applicable) will hear the Call-ring tone.
4.1 Selecting a Call-Ring tone
The Terrain 750 is equipped with 10 different types of
a. Press the MENU button 8 times, until "CA" is displayed
b. Press the UP or DOWN button to select the desired
Call-ring tone. The Call- Ring tone sound will be
played when changing from one tone to another.
c. Press the PTT button to confirm your setting.
The Roger Beep is a tone which is automatically transmitted
whenever the PTT button is released. This alerts the receiving
party to inform that you have intentionally ended the
transmission, and you are now in receive mode.
4.2 Setting the Roger Beep
a. Press the MENU button 9 times,
b. Press the UP or DOWN button to select the Roger beep
c. Press the PTT button to confirm your setting.
endless loop
83 DCS codes.
4. Call-Ring tone
Call-Ring tones that you can send to alert other PMR users.
or
Note: Your Terrain 750 can alert you to an incoming signal by emitting
an audible tone signal.
This feature allows the Terrain 750 to emit a confirmation
4.3 Setting the Key Tone ON or OFF
a. Press the MENU button 10 times, "t0" is displayed with "On"
flashing on the LCD Screen.
b. Press the UP or DOWN button to select the Key tone
on (On) or off (OF).
c. Press the PTT button to confirm your setting.
“SC
SC and
button 5 times, the scan icon
icons flash on the LCD screen. Press the
button to begin scanning the CTCSS from 1-38.
icons flash on the LCD screen. Press the
button to begin scanning DCS code 1-83.
with "01" flashing on the LCD Screen.
"r0" is displayed with "On"
flashing on the LCD Screen.
on (On) or Off (OF).
tone after pressing each button.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Binatone Terrain 750 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Binatone Terrain 750 in the language / languages: English as an attachment in your email.

The manual is 2,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info