Manual Binatone S500 Sat Nav (page 40 of 53) (English)

496771

Zoom out

Zoom in

1/53

NAVIGATION

8.2 Safety Alert

Tap to open the safety alert options screen. From

this screen you can set two separate safety alerts.

Speed camera on – This lets you activate or

deactivate the speed camera warning, when

activated the unit will warn you of an approaching

speed camera visually and shows you the distance

to the camera.

When the option is shown highlighted blue it is

activated.

Speed alert when exceeding the road speed limit – This lets you activate or deactivate the road

speed limit warning. As well as speed camera locations, the unit contains information about the

speed limit of many roads. When activated the unit will show you the speed limit for the road you

are on with a fixed speed limit icon, if you exceed the speed limit (including any tolerance you

have set) for the road you are on the speed limit icon will flash and the unit will beep.

When the option is shown with an blue indicator it is activated.

When active you can then change the speeding tolerance using the and keys to select

the tolerance you would like from 0%, 5%, 10%, 15% and 20%. The unit will then only warn you

when you exceed the speed limit by more than this percentage.

Set the required options and tap to confirm the unit will then return to the settings screen.

8.3 Trace Record

The unit is capable of logging all

positioning information received from the

GPS satellites during navigation. It then

uses this information to draw a track of the

route on the map. This enables you to

review the route at a later time.

If you have previously recorded any trace

records these will be shown in the list. If

there are no trace records you will have to

record one first.

Recording a trace record: Use the button to start the recording process. When active this

button will then change to show . In this way the key will always show the option which is

currently not selected. It is recommended that you start recording after your route has been

planned or when you are in Free Navigation and you have a valid GPS signal, and you should

stop recording once you have reached your destination. This will prevent the unit from continually

recording while you are not driving and it will also divide each journey into a separate trace record.

Once you have started a trace recording you will need to return back to the map screen.

Note: if you switch the unit off without stopping the trace record function then your trace record for

that journey will be lost.

screen hard to see as too light and not enough definition
Submitted on 1-6-2022 at 10:43
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Binatone S500 Sat Nav in the language / languages: English as an attachment in your email.

The manual is 1,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Binatone S500 Sat Nav Manual

Product: