496741
39
Zoom out
Zoom in
Previous page
1/47
Next page
37
 
You can select the number of rings before the answering system answers a call
and starts playing the OGA.
You can set the delay from 3 to 8 rings, or TOLL SAVER.
IMPORTANT: If your network voice messaging system (e.g. the 1571 service) is
enabled, you must set your Ring Delay to less than 6 rings, otherwise the network
service will answer any calls before the answering machine of your iDECT C10i
and prevent it from recording any messages.
1. Press <MENU/OK>.
2. Press <UP/DOWN> to select and then press <MENU/OK>.
3. Press <UP/DOWN> to select 
4. Press <MENU/OK> to show and then press <MENU/OK>
again.
5. Press <UP/DOWN> to select the desired setting and then press
<MENU/OK> to conrm.
If you select , the system answers after the third ring
if there are new messages, or after the fth ring if there is no new message.
This allows you to phone in to your system when you are away from home,
to see if there are new messages, and if the call is not answered after three
or four rings, you can hang up before incurring call charges.
Remote operation
iDECT C10i system
Using a tone-dialling phone, dial your home number
You can also use the codes on the other side of this card
While your outgoing message is playing, press
Key in your remote security code
The default code is 0000. For details of how to set a new code,
see the User Guide 8.7.3.4 on page 39.
1
2
3
4
Note:The < > can be entered at any time after the OGA starts playing,
and the 4-digit PIN should follow without any delays. If the 4-digit
Remote Access PIN is entered incorrectly two times consecutively,
the line will be released automatically.
Note: If your answering machine is switched off, the phone will enter into
the remote access mode after 10 rings.
You can then enter the 4-digit remote access PIN
(Default Remote Access PIN is 0000) to activate the remote access feature.
#
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Binatone iDECT C10i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Binatone iDECT C10i in the language / languages: English as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info