Installation and set-up
4
1
3
5
4
Choose a suitable site for the
base unit See page 3
Plug the mains adapter into a
230 V AC, 50 Hz mains socket,
with the switch on the socket
set to OFF
Plug the mains adapter into a 230 V AC,
50 Hz mains socket, with the switch on
the socket set to OFF
Switch on at the mains socket(s)
If you have one or more charger pods …
Connect the mains power lead
and the telephone line cord into
the underside of the base unit
2
Use the telephone line
cord supplied with your
3300 — do not use any
other telephone line cord
e
See the note
on page 3
See the note
on page 3
Binatone Help Line: 01325 304 473 5
Fit a battery pack in each handset
6
7
RED BLACK
A. Plug in the
connector
B. Tuck the wires in
and lay the battery
pack in the
compartment
C. Fit the battery
compartment
cover, sliding it into
place and pressing
firmly to make sure
it is secure
Charge the batteries for 15 hours
When you don’t need to use the handset (for
example, overnight or when you go out),
replace it on the base unit or charger pod, to
keep the batteries charged.
Before you use the handset for the
first time, it is important to charge
the batteries fully.
Leave the handset on the charging
cradle for 15 hours.
The handset ‘beeps’ when it’s correctly
in position on the charging cradle.
The battery
level symbol
blinks
The Charge
lights come
on
Make sure the mains socket is
switched on if you want to use
the phone — it will not work
without electrical power
Connect the base unit to the telephone line
Switch off power at the mains socket
Insert the telephone line plug into
the socket as shown
Switch mains power back on
8
Use the plug to
raise the shutter
before pushing
it into the socket
NOTE: the charger pod does not have
a connection to the tele