782283
2
Zoom out
Zoom in
Previous page
1/2
Next page
The minute display flashes.
Press the right button 3
until the correct number
appears.
The minute display is set.
Confirm your entry by pressing
the left button 4.
Setting the backlight
You can choose between LT-1 and
LT-2 mode.
LT1-1 mode:
The backlight will be activated for
approx. 3 seconds as soon as any
button is pressed in any mode
within the set time frame.
LT2 MODE:
The backlight will turn on or off if
the right button 3 is held down
for approx. 3 seconds.
Setting:
The LT-1 mode indicator flashes on
the display.
Press the right button 3 to
switch between LT-1 mode and
LT-2 mode.
Confirm your entry by pressing
the left button 4.
After you have confirmed LT-2
mode, the main function indicator
will appear.
After you have confirmed LT-1
mode, you will set the time frame
(start and stop time) for activating
the backlight.
The hour display flashes.
Press the right button 3
until the correct number
appears.
The hour display is set.
Confirm your entry by pressing
the left button 4.
The minute display flashes.
Press the right button 3
until the correct number
appears.
The minute display is set.
Confirm your entry by pressing
the left button 4.
Testing the bicycle
computer
Turn the front wheel of the
bicycle.
The speed appears in the
display 2 if the bicycle
computer 1, sensor 11 and
magnet 7 have been correctly
mounted. If the speed does
not appear in the display, check
and repeat the assembly proce-
dure if necessary (see chapter
“Assembly).
Restarting bicycle
computer
To reset stored data, press the
left button 4 and right but-
ton 3 together for approx.
5seconds.
After restarting/resetting the
device, all settings must be reen-
tered (see section “Setting tire
circumference” to section “Setting
the time).
Automatic power-off of
the bicycle computer
When at a standstill, the bicycle
computer automatically powers
off after approx. 5 minutes with-
out loss of data.
To switch the
bicycle computer 1
back on again, press the
right button 3 or the
left button 4.
Automatic stop-start
function
All functions have an automatic
start-stop function (exception:
stopwatch and time).
To activate this stop-start func-
tion, first switch on the bicycle
computer 1 by pressing the
left button 4 or the right
button 3.
Measuring starts when the mag-
net 7 passes the sensor 11 for
the first time. If the bicycle is still,
it waits approx. 3seconds for a
new signal. If there is no further
signal, the measuring process
stops automatically.
Modes/functions
The speed and time indicator
appears after the bicycle computer
has started up (see Fig.H).
Speed
This is constantly calculated
and updated; it is always
shown in the middle of the
display 2. Max. measuring
range: up to 199.9 km/h / mph.
CLK (time) / SCAN
The time is shown in 24-hour
mode. It is set as described in
the section “Setting the time”.
Press the left button to access
the SCAN function.
The word SCAN appears in the
bottom left of the display. In this
mode, the functions DST, TM, and
AV SPD are automatically dis-
played at a 2 second interval.
Press the left button to switch
back to time.
Press the right button to
switch to the stopwatch.
STW (Stopwatch)
Press the left button to start/
stop the stopwatch. Maximum
measuring range: 9:59:59.
Press the right button to
switch to trip distance.
DST (distance)
The counter for trip distance will
automatically start when you
start cycling.
Maximum measuring range:
999.99.
Press the left button to switch
between the trip distance and
total distance.
Press the right button to
switch to the cycling time
indicator.
TOT DST (total distance)
The total kilometers (miles) cycled
are saved.
Maximum measuring range:
99999.
Press the right button to
switch to the cycling time
indicator.
TM (cycling time)
The total cycling time since the
last reboot is shown. Maximum
measuring range: 9:59:59.
Press the right button to
switch to the average speed.
AV SPD (average speed)
Maximum measuring range: 199.9
km/h or mp/h.
Press the left button to switch
between the average and
maximum speed.
Press the right button to
switch to calorie counter.
MX SPD (maximum speed)
The maximum speed reached is
stored.
Maximum measuring range: 199.9
km/h or mp/h.
Press the right button to
switch to calorie counter.
CAL (calorie counter)
The average calories burned
(kcal) are shown.
Maximum measuring range:
999.9.
Press the left button to switch
between the calorie counter,
total calories burned and the
fat burning meter.
Press the right button to
switch to the temperature.
TOTCAL (total calories burned)
The total calories burned (kcal)
since the last reboot is shown.
Maximum measuring range:
99999.
Press the right button to
switch to the temperature.
FAT (fat burning meter)
The average amount of fat
burned is shown in grams.
Maximum measuring range:
999.9.
Press the right button to
switch to the temperature.
TEP (temperature)
The temperature is measured and
updated approx. every 2 minutes.
Press the left button to switch
between the current, maxi-
mum and minimum tempera-
ture measured.
Hold the left button for the
current temperature indicator
for approx. 5 seconds to switch
to °F (Fahrenheit).
Press the right button to
switch to the time.
Speed comparison
Cycling faster or slower than
the average speed up to this
point will be shown with or
on the top left next to the speed
indicator.
Resetting data
(AV SPD, MX SPD, TOTCAL, STW, DST,
TOT DST, TM)
Press the right/left button
until the corresponding func-
tion is shown.
Hold the left button down for
approx. 3 seconds to reset the
value.
Changing the battery
1. Open the battery com-
partment of the bicycle
computer 1 or sensor 11 by
turning the battery compart-
ment cover 14 counterclock-
wise with a coin (see Fig.E).
2. Remove the depleted
battery 9 or 10 using a
pointed object.
3. Insert a new battery so that
the positive pole (+) is facing
upward.
4. Replace the battery compart-
ment cover.
5. Close the battery compart-
ment by turning the battery
compartment cover clockwise
with a coin (see Fig.E).
6. Start the bicycle computer
and enter the settings again
(see section “Selecting kilo-
meters/miles” to section “Set-
ting the backlight).
Cleaning and
maintenance
NOTICE!
Risk of short circuit!
Liquid that has penetrated the
housing may cause a short-cir-
cuit.
Never immerse the bicycle
computer in liquids.
Make sure that no liquid
penetrates the housing.
NOTICE!
Risk of damage!
Improper cleaning can damage
the bicycle computer.
Do not use any aggressive
cleaners, brushes with
metal or nylon bristles as
well as sharp or metallic
cleaning utensils such as
knives, hard scrapers or the
like. They could damage
the surfaces.
Watertightness
Your bicycle computer is pro-
tected against splashing water,
please do not submerge in water.
Only clean with a damp
cleaning cloth and wipe dry
afterwards.
Storage
All parts must be completely dry
before storage.
Always store the bicycle com-
puter 1 in a dry area.
Protect the bicycle computer
from direct sunlight.
Store the bicycle computer
so that it is not accessible to
children, securely locked away
and at a storage temperature
between 14°F and 122°F
(-10°C and 50°C) (room tem-
perature).
Troubleshooting
No speed display:
Check the alignment of the
sensor 11 and magnet 7.
Check the distance between
the magnet and sensor (max.
0.08" (2mm)) as well as the
distance and angle between
the bicycle computer 1 and
sensor (9/max. 23" (60cm)).
Check the battery 9 and 10
of the bicycle computer and
sensor.
Replace the battery.
Incorrect speed measurement:
Check the setting of the tire
circumference.
Check the kilometers/miles
setting.
Check the alignment of the
sensor and magnet.
Black display:
Check whether the display 2
has become too hot. Allow it to
cool down.
Display shows irregular digits:
Remove the battery and insert
it again while making sure
that the polarity is correct.
Weak or no display:
Check that the battery is prop-
erly inserted.
Replace the battery.
Technical data
Model: 22967
Operating voltage: 3 V
Sensor battery: CR2032
Computer battery: CR2016
Protection class: IP44
Weight: approx.
0.13lb (57g)
Dimensions
(W × D × H):
1.5 × 2.4 ×
0.6" (3.9 ×
6.2 × 1.5cm)
Article number:95698
Disposal
Disposing of the
packaging
Sort the packaging before you
dispose of it. Dispose of paper-
board and cardboard with the
recycled paper service and
wrappings with the appropri-
ate collection service.
Disposing of the bicycle
computer
Should the bicycle computer
no longer be capable of being
used at some point in time,
dispose of it in accordance
with the regulations in force
in your city or state.
Please ensure your recycling
information applies to local
regulations and the EPA rec-
ommendations
(www.epa.gov).
Batteries and rechargeable
batteries must not be dis-
posed of with household
waste!
As the end user you are required
by law to bring all batteries
and rechargeable batteries,
regardless whether they contain
harmful substances* or not, to a
collection point run by the com-
munal authority or borough or
to a retailer, so that they can be
disposed of in an environmen-
tally friendly manner.
The battery must be removed
from the bicycle computer be-
fore disposal.
*labelled with: Cd = cadmium,
Hg = mercury, Pb = lead
zur Freigabe/Korrektur_V8
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bikemate 22967 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bikemate 22967 in the language / languages: English as an attachment in your email.

The manual is 1.85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info