21
Getting started
This unit can be operated using AC power.
AC ADAPTOR OPERATION
An AC-DC adaptor with an output of 5V DC 1000 mA (included) is required to use the main unit in AC
power mode.
Phonograph function
4. Rotate the POWER/VOLUME knob clockwise until you hear a “click” sound to turn the device
on. The Power LED indicator will light up.
5. Put a record on the turntable platter. Remember to use the 45 RPM adaptor located on the
top-right corner when playing a 45 RPM record.
6. Remove the white plastic needle cover. Keep the needle cover in a safe and accessible place
for future use.
4. Select the speed according to the record you are playing.
5. Release the tone arm by unlocking the tone arm lock.
6. Lift the tone arm by pushing back the lift lever.
7. Gently move the tone arm towards the turntable. Then, push the lift lever forward. The tone
arm will gently descend onto the record and start playback.
8. To pause or stop playing, you need to manually lift and move the tone arm back to the tone
arm rest.
Line out
1. Connect the RCA line out jacks to auxiliary input sockets of your home amplifier device. Make
sure to match the socket colours up to the jack colours.
2. Connect the power adaptor to the rear of the unit and the power supply. Then power on your
amplifier device and adjust its volume level to your preference.
Line In
3. Rotate the POWER/VOLUME knob clockwise until you hear a “click” sound to turn the device
on.
4. Connect the line-in cable to the 3.5mm line-in jack on the unit and your audio source.