669692
14
Zoom out
Zoom in
Previous page
1/56
Next page
- EN 5 -
Setting the Clock
In standby mode, press & hold Clock Set [10] for 2 seconds. The display will ash.
Press Hour Set / Minute Set (11, 12) to set the hour and minute.
The clock will display in 24-hour format.
1. Dimmer Control (LED Display)
Press Dimmer [9] to control the brightness of digits on the display.
There are 3 levels: High level (brightness)
Low level (Dim light) OFF.
2. Setting the Alarm
In standby mode, press & hold Alarm 1 [6] for 2 seconds. The main digits will display 0:00.
Press Hour [11] & Min [12] to set the alarm hour & minute.
Press Alarm 1 [6] again to conrm alarm 1 setting.
Press Skip - /+ [11/12] to switch between the alarm output ringer “bb” (beep sound) and radio (“F”)
Press Alarm 1 [6] to conrm the alarm output (3 selections).
“b1” metal ringing bell; “b2” Buzzer and “FM” radio “
The product is equipped with a dual alarm. Repeat the above steps to set Alarm 2 [7] & select the
alarm output. Once the alarm is set, the alarm display light will be ON.
Switching Off the Alarm
To turn off the metal ringing bell, buzzer or FM radio, press any key on rear of alarm (except Snooze).
The Alarm clock will resume the function at the same time the next day.
Cancelling/Disabling Alarm Function
In standby mode, Press Alarm [6] or [7] twice. Doing so cancels the alarm function. The alarm
display light will be OFF.
If no key is pressed for 10 seconds, the system will return to normal mode.
3. Using the Snooze Function
When the alarm is sounding or radio output is on, you may press [9] “SNOOZE”. The Snooze display
light will ash. Pressing “SNOOZE” stops the alarm or radio, but the alarm or radio will be re-activated
every 9 minutes. Press Alarm 1 [6] or Alarm 2 [7] or (5) to switch off the alarm. Doing so also
switches off the Snooze indicator light.
4. NAP Timer
In standby mode, press [8] to activate the NAP timer. The ringer will sound once the selected time
has elapsed.
The alarm will start to count down from the default setting of 120 minutes. The user may select other
timer options: 120, 90, 60, 30, 15, 10, 05 & OFF.
When the ringer sounds, press [8] or
(5) again to switch off the ringing. To cancel the NAP timer
function, press [8] to select OFF.
5. Listen to FM Radio
Press [5] to switch on the radio mode. The FM indicator light is on & the display shows the current
frequency (e.g. FM92.6 MHz).
In radio mode, press
Skip -/+ [11, 12] to adjust the tuning and hold for 2 seconds to search
for the next station.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bigben RR90 EPOK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bigben RR90 EPOK in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info