706702

Bigben RR16QUOTES Manual

14
Zoom out
Zoom in
Previous page
1/56
Next page
- EN 5 -
1.
Setting the clock
• In standby mode, press & hold Clock Set [6] for 2 seconds. The display will flash and show 0:00.
• Press Tune - [7] & Tune + [8] to set the hour and minute.
• Press Clock Set [6] again to confirm the time
• The clock will display in 24-hour format.
2. Dimmer control (LED Display)
• Press Dimmer [5] to control the brightness of the digits on the display.
• There are 3 levels: High level (brightness) Mid level (Dim light) Low level (dark OFF)
3. Setting the alarm
• In standby mode, press & hold Alarm 1 [2] for 2 seconds and the main digit will show 0:00.
• Press Hour [7] & Min [8] to set the alarm hour & minute.
• Press Alarm 1 [2] again to confirm Alarm 1.
• Press [7 or 8] to switch between the alarm output bell “bb” (beep sound) and radio “F”.
• Press Alarm 1 [2] to confirm the alarm output.
• There is dual alarm. Repeat the steps above to set Alarm 2 [3] & select the alarm output.
Turning off the alarm
• To turn off the beep sound, press Alarm 1 [2] or Alarm 2 [3].
• To turn off the radio output, press [1] to go back to standby mode.
• The Alarm clock will resume the function at the same time the next day.
Cancelling / Disabling the alarm function:
• In standby mode, Press Alarm [2] or [3] for 2 times. The alarm function has been cancelled.
If no key is pressed for 10 seconds, the system will go back to normal mode.
4. Using the snooze function
When the alarm is ringing or radio output is on, press [5] “SNOOZE”. The Snooze display light will
flash. The alarm will stop, but ring again or the radio will come on every 9 minutes. Press [2 or 3] to
turn off the alarm and the Snooze indicator light will be also off.
5. NAP timer
• In standby mode, press [4] to activate the NAP timer. The bell will ring after the selected time.
• It will start to count down from the default 120 minutes. There are different options for the user: 120,
90, 60, 30, 15, 10, 05 & OFF. To turn off the NAP timer, select OFF.
6. Listen to FM radio
• Press [1] to turn on the radio mode. The FM light is on & the display shows the current frequency
e.g. FM92.6 MHz.
• In radio mode, press Tune - / + [7, 8] to adjust the signal and hold for 3 seconds to search for the
next station.
6.1. Storing a station to memory – as a preset station
• In radio mode, Press & hold Tune -/ + [7, 8] to search for the channel.
•
Press [6] to start the memory
. The display will flash the station number. (e.g. P01, P02, etc. to P20).
•
Press Tune -/+ [7, 8] to select the desired station number, e.g. P01, P02, etc. to P20
•
Finally, press Memory [6] to confirm and save the station numbe .
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bigben RR16QUOTES at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bigben RR16QUOTES in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 5,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info