496712

Bigben Parental Control - PS3 joystick Manual

4
Zoom out
Zoom in
Previous page
1/24
Next page
H. A beep will sound indicating that the new code is validated.
5. SETTING THE CLOCK:
A. Press and hold down buttons “SELECT” and “START” for 2 seconds.
B. The word “PWD” fl ashes. Enter your code using the numbers on the cross, circle, square and triangle buttons on your controller. A
beep will sound.
C. The words “PWD” and “mins” fl ash.
D. Press the “SELECT” button. A beep will sound.
E. A number showing the programmed game time is displayed on the LCD screen. The word “mins” fl ashes, showing that you can set
the new game time.
F. Adjust game time using the buttons L2 and R2.*
Short press on L2: Reduce the time by 1 minute.
Long press L2: Reduce the time by 5 minutes in length.
Short press on R2: Increase the time by 1 minute.
Long press on R2: Increase the time by 5 minutes in length.
G. Once the desired game play time is reached, press the “SELECT” button.
H. A beep sounds showing that the new game time has been validated.
* The game time can be set from 001 to 240 minutes (4 hours) maximum.
6. STANDBY MODE:
If the controller is inactive for over 3 minutes, it will switch off automatically. The remaining game play time at shut-off is saved.
To “wake” the parental controller, press the “SELECT”, “START” or “HOME” button.
NOTE: If the controller is switched “OFF” or if the batteries are dead or removed, the safety code will have to be entered when the
controller is switched back on.
7. REINITIALISING THE PARENTAL CONTROL:
If you forget the security code, the parental controller can be reset to its default parameters.
Press and hold buttons L1, L2, R1 and R2 for 5 seconds. The default security code is 423124, and game time is 15 minutes.
Note that it is important that the user does not know this default reset code. If they know it they can continue to play for 15 minute
intervals.
TROUBLESHOOTING.
Controller is not working.
- Ensure that the power button is the ‘On’ position.
- Check that the batteries are not low. If so, replace the batteries. If power is low the Player LED will normally fl ash to indicate that the
batteries need replacing.
- Ensure that the receiver is connected to the console and press the home button on the controller to connect.
- Check that the switch on the receiver is set to PS3™ mode.
- Ensure that the correct password is being used.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bigben Parental Control - PS3 joystick at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bigben Parental Control - PS3 joystick in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info