814571
24
Zoom out
Zoom in
Previous page
1/38
Next page
EN EN
8 9
OPERATING NOTES
If you want to prepare sauces, soups or nut milk, add the ingredients in 2 to 3 steps, depending on their
hardness. The content should not be too little, but also not too much. Too many ingredients in one process may
lead to overheating and automatic shutdown of the motor.
In that case, please wait until the device cools off as described above, see also Chapter “Safety Functions” on page 5.
Always keep the lid closed during the operation of your Tune Pro. This privents any scalding or splashes of hot foods.
When preparing hot liquids, make especially sure that the lid is closed well and your Tune Pro is standing securely. It is
advisable to first start at low speed and increase gradually. Alternatively you can use the Pulse mode or one of the preset
program. See also Chapter “Operating / Overview preset programs” on page 14.
Never put your hands into the jar during operation. Do not dip any objects into the jar during operation, otherwise the
motor, blades and other parts of the device can be damages. Only use the supplied tamper T42S through the lid opening
(Fig. [2], page 1), since it cannot contact the blades through the opening for the measuring cup, see also Chapter
“Operating with the tamper T42S” on page 17.
Always pour liquids and soft ingredients first into the jar before the harder ingredients, such as ice cubes, carrots, etc.
If the chosen program or the manual mode is finished, please wait until the blades are fully stopped before removal of
the jar, otherwise the connection can be damaged.
If a burning smell rises from the motor base, stop the device immediately and disconnect the power supply. The smell
can result from abrasion of the rubber bearing mounted incorrectly. Please contact your customer service immediately.
When preparing with thick and sticky ingredients such as dough, it is possible that the motor and the blades turn idle.
This is because bubble has formed in the ingredients. Pause the mixing process with the pause button4; and remove
the measuring cup from the jar lid. This opening allows you to remove the air bubble by the supplied tamper. Reinsert
the measuring cup and press the pause button4; continue with the preparation .
UNPACKING
CONTENTS
START-UP
To unpack your Tune Pro:
Remove the motor base and all accessories from the carton.
Remove all packing material from the motor base and the accessories
Keep the packaging material during the warranty period, in order to pack appropriately for warranty service.
Your high-performance blender is delivered with the following components:
Motor base Tune Pro
Jar Cube+, Lid (incl. silicon seal) and measuring cup
Tamper T42S with patented temperaturecontrol
This instruction manual
PLEASE NOTE THE WARNING LABELS ON THE BLENDER AND TAMPER
Do not remove any stickers on the device because they are attached for safety reasons
and are required for warranty enquiry.
Please do not remove the stickers on the handle of the tamper. On this, the safe use of the tamper is shown.
ATTENTION
During the start-up of the device, personal injury or property damage can occur.
Observe the safety precautions on page 6.
Packing materials must not be used to play with, because there is danger of suffocation.
Ensure that you have closed the mixing jar with the jar lid properly before operation.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bianco di puro Tune Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bianco di puro Tune Pro in the language / languages: German as an attachment in your email.

The manual is 2.24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info