814581
8
Zoom out
Zoom in
Previous page
1/36
Next page
EN
8
Operating Notes
If you want to prepare sauces or soups, add the ingredients depending on the degree of hardness in 2 to 3 steps
to the mixing container. The amount should not be too small, but also not too much. Too many ingredients in one
process can lead to overheating and automatic shut-down of the motor. Wait in that case until the device cools down
(see image 5).
Always keep the lid of the mixing container closed during the operation of your piano. This avoids any scalding or
splashes of hot foods.
Never during operation reach into the mixing container with your hands to avoid injuries.
Never put objects into the mixing container during the operation, otherwise the blade and other parts of the device
could be destroyed. The exception is the supplied plunger, which is so designed that it cannot contact the blades. Here
it is important that it is only inserted through the lid opening (image [2], page 1). On page 18 you nd the description
of the tamper.
If you want to prepare hot drinks, rice milk or warm soups, take special care that the lid inc. measuring beaker closes
the mixing container properly and your piano is set up safely. It is advisable to rst start at low speed and to increase it
gradually. Alternatively, you can use the pulse mode or one of the automatic programmes (warm soup; see page 16 f.).
If the chosen programme or the manual mode is nished, wait with the removal of the mixing container until the blades
are not moving/turning, otherwise the coupling can be damaged.
An intensive smell can occur due to overloading. Reduce the lling quantity and continue the preparation.
If a singed smell appears from the motor block, stop the device immediately and disconnect the power supply. The
smell can result from abrasion of the rubber mount of the coupling, if it was not mounted properly. Please contact in
this case your bianco di puro customer service immediately.
During preparation of sticky ingredients, such as dough, it can happen that the motor and blades turn idly. This is due
to an air bubble that has formed in the ingredients. Stop the programme and remove only the measuring beaker. You
can remove the air bubble through the opening with the included tamper. Replace the measuring beaker and continue
the preparation.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bianco di puro Piano at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bianco di puro Piano in the language / languages: English as an attachment in your email.

The manual is 0.87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bianco di puro Piano

Bianco di puro Piano User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info