814578
8
Zoom out
Zoom in
Previous page
1/36
Next page
EN8
Operating Notes
If you want to prepare sauces, soups or nut milk, add the ingredients in 2 to 3 steps, depending on their hardness. The
amount should not be too little, but also not too much. Too many ingredients in one process can lead to overheating and
automatic shutdown of the motor. Wait in that case until the device cools off as described above (see page 5).
Always keep the lid closed during the operation of your forte 2.0. This avoids any scalding or splashes of hot foods.
Never put your hands into the mixing container during operation to avoid injuries. Do not dip any objects into the mixing
container during operation, since otherwise the motor, blades and other parts of the device can be destroyed. Except for
the supplied tamper TM that may only be used through the lid opening (Fig. [2], page 1), since it cannot contact the blades
through the opening for the measuring beaker. On page 17, you will nd the description of the tamper.
When preparing hot drinks, soy milk or soups, make especially sure that the lid is closed well and your forte 2.0 is standing
securely. It is advisable to rst with start at low speed and then to increase it gradually. Alternatively you can either use the
Pulse mode or one of the preset programmes (soup, sauce or soy milk, see page 14).
Always pour liquids and soft ingredients rst into the mixing container and afterwards the harder ingredients, such as ice
cubes, green leaves etc.
If the chosen programme or the manual mode is nished, please wait until the blades are fully stopped before removal of
the mixing container. Otherwise the connection can be damaged.
If a singed smell exudes from the motor block, stop the device immediately and disconnect the power cable. The smell can
result from abrasion of the rubber bearing of the connection if it was not mounted correctly. In this case, please contact
your customer service immediately.
When preparing thick and sticky ingredients such as dough, it can happen that the motor and the blades turn idly, this is
because an air bubble has formed in the ingredients, stop the programme and remove only the measuring beaker. Your
can remove the air bubble through the opening with the included tamper TM. Replace the measuring beaker and continue
the preparation.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bianco di puro Forte 2.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bianco di puro Forte 2.0 in the language / languages: English as an attachment in your email.

The manual is 1.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bianco di puro Forte 2.0

Bianco di puro Forte 2.0 User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info