528807
12
Zoom out
Zoom in
Previous page
1/41
Next page
12
handlebar stem (B) and the monitor
(E), figure 10.
Insert the monitor (E) onto the
handlebar stem (B), as shown in figure
10, making sure not to pinch any of
the cables. Fit the bolts (s) along with
the flat washers, making sure that the
handlebar is aligned correctly,
securely tighten all of the bolts on the
handlebar stem including the bolts at
the base which were left hand tight in
point 4.
Mod. H871.-
Bring the monitor (E) to the handlebar
stem (B) figure 11, connect the two
terminals (P / Q) coming out of the
handlebar stem (B) and the monitor
(E), figure 11.
Insert the monitor (E) onto the
handlebar stem (B), as shown in figure
11, making sure not to pinch any of
the cables. Fit the bolts (s) along with
the flat washers, making sure that the
handlebar is aligned correctly,
securely tighten all of the bolts on the
handlebar stem including the bolts at
the base which were left hand tight in
point 4.
Mod. H872N.-
Bring the monitor (E) to the handlebar
stem (B) figure 11, connect the two
terminals (P/Q; y/v) coming out of the
handlebar stem (B) and the monitor
(E), figure 11.
Insert the monitor (E) onto the
handlebar stem (B), as shown in figure
11, making sure not to pinch any of
the cables. Fit the bolts (s) along with
the flat washers, making sure that the
handlebar is aligned correctly,
securely tighten all of the bolts on the
handlebar stem including the bolts at
the base which were left hand tight in
point 4.
LEVELLING
Once the unit has been placed into its
fi nal po- sition, make sure that it sits
flat on the floor and that it is level. This
is achieved by screwing the adjustable
foot (U) up or down, figure 12.
MOVEMENT & STORAGE.
The unit is equipped with wheels (V)
to make it easier to move about. The
two wheels at the front of the unit
make it easier to place the unit in any
chosen position, as shown in the
figure 13. Store it in a dry place,
preferably not subject to changes in
temperature.
MAINS CONNECTION
Insert the jack (m) on the transformer
(g) into the connection hole (k) on the
main body (A) (bottom, rear of the
machine) and then plug the
transformer into a 220 V mains supply,
Figure 14.
BH RESERVES THE RIGHT TO
MODIFY THE SPECIFICATIONS OF
ITS PRODUCTS WITHOUT PRIOR
NOTICE
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BH Fitness H872N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BH Fitness H872N in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info