542473
10
Zoom out
Zoom in
Previous page
1/36
Next page
10
5 Your unit can only be used by one
person at a time.
6 Use suitable clothing and footwear.
Make sure all laces/cords are tied
correctly.
1. ASSEMBLY
INSTRUCTIONS.-
Take the unit out of its box and make
sure that all of the pieces are there:
The assistance of a second person
is advisable for the assembly work.
(40) Main body; (13) handlebar stem;
(20) Stabiliser bar with wheels; (30)
Stabiliser bar with adjustable blocks;
(2) Monitor with handlebar; (25) and
(31) Saddle post covers; (33) Saddle;
(39) Saddle post; (44L) Left pedal;
(44R) Right pedal; (41) Saddle height
adjustment knob; (87) Mains
transformer; Bag of screws containing:
(85) Self tapping screw ST4.0x14; (86)
Flatwashers M4x16; Double ended
spanner; Box spanner with
screwdriver; Allen key 6mm.
2. FITTING THE STABILISER
BARS.-
Rest the main body on a wad of
packaging, as shown in Fig.2 (this will
help with the assembly work). Take
hold of the front stabiliser bar fitted
with wheels (20).
Remove the bolts (26) and their nuts
and washers. Now line up the two red
dots, as shown in Fig.2, and refit the
bolts (26), nuts and washers. Tighten
securely.
Next, take the finish trim piece for
stabiliser (25) and rest it on the
stabiliser bar with wheels (20) that you
have just assembled. Attach the trim
to the bottom using the plastic
threaded screws (85) and flat washers
(86).
Next, rest the main body on a wad of
packaging material (this makes
assembly easier). Take the rear
stabiliser with adjustable feet (30) and
position it on the machine’s rear stand,
insert the bolts (26) with the flat
washers and nuts, tighten securely.
Then take the finish trim piece for
stabiliser (31) and rest it on the
stabiliser bar (30) that you have just
assembled. Attach the trim to the
bottom using the plastic threaded
screws (85) and flat washers (86),
Fig.3.
3. ATTACHING THE PEDALS.-
The assembly instructions for the
pedals must be followed to the letter,
fitting these incorrectly could damage
the screw thread on the pedal or the
crank. Right and left refer to the
position that the user adopts when
sitting on the saddle to do the
exercises.
The right-hand pedal (44R),, marked
with the letter (R), screws onto the
right-hand crank, also marked with an
(R), in a clockwise direction. Tighten
securely, Fig.4.
The left-hand pedal (44L), marked
with the letter (L), screws onto the left-
hand crank, also marked with an (L),
in an anti-clockwise direction. Tighten
securely Fig.4.
4. FITTING THE HANDLEBAR
STEM.-
Connect the two terminals (16 and 18)
Fig.5, coming out of the handlebar
stem (13) and the main body (40).
Insert the handlebar stem (13) onto
the boss on the main body (40) taking
care not to pinch the cables.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BH Fitness H8715 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BH Fitness H8715 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info