528762

BH Fitness H8702 Monitor Manual

8
Zoom out
Zoom in
Previous page
1/32
Next page
8
2. Select the time by pressing the
keys.
3. Begin the exercise and the time will
start to count down.
If you stop exercising the countdown
will also stop, being stored in the
memory until the monitor’s three
minute waiting period has elapsed.
When the countdown reaches zero it
will beep for 8 seconds to indicate that
the selected time has been completed.
The time will now start to count
upwards.
C. DISTANCE FUNCTION
This function counts up or down in
steps of 0.5 km/m, up to a maximum
of 99.50 km/m. Pressing the MODE
key for more than two seconds will
reset all of the values, except those
relating to the time and date.
1. Press the MODE key until the
exercise characters appear on the
display. Select the small DIST
(Distance) window so that it flashes.
2. Select the distance by pressing the
keys.
3. Begin the exercise and the distance
will start to count down. If you stop
exercising the countdown will also
stop, being stored in the memory until
the monitor’s three minute waiting
period has elapsed. When the
countdown reaches zero it will beep
for 8 seconds to indicate that the
selected distance has been
completed. The distance will now start
to count upwards.
D. CALORIE FUNCTION
This function counts up or down in
steps of one calorie, up to a maximum
of 9990 calories. Pressing the MODE
key for more than two seconds will
reset all of the values, except those
relating to the time and date.
1. Press the MODE key until the
exercise characters appear on the
display. Select the small CAL
(Calories) window so that it flashes.
2. Select the calories by pressing the
keys.
3. Begin the exercise and the calories
will start to count down. If you stop
exercising the countdown will also
stop, being stored in the memory until
the monitor’s three minute waiting
period has elapsed. When the
countdown reaches zero it will beep
for 8 seconds to indicate that the
selected value has been completed.
The calories will now start to count
upwards.
When the programmed calories have
finished, the monitor will beep for 8
seconds and begin to increase the
calories automatically.
E. PULSE FUNCTION
The pulse function shows the heart
beats per minute (BPM). To use this
function place your hands on the
handlebar sensors (R), Fig. 2, and
your heart rate will be displayed after
a few seconds.
NOTE: This is not a medical
appliance so values are for
guideline purposes only.
To select the THR (Target Heart Rate)
carry out the following steps:
1. Press the MODE key until the
exercise characters appear on the
display. Select the small Pulse window
so that it flashes and THR will appear.
2. Press the keys to set the pulse
rate value that you wish to use during
the exercise, (between 30 and 240
BPM), the monitor’s default value is 30
BPM.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BH Fitness H8702 Monitor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BH Fitness H8702 Monitor in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info