528721

BH Fitness H492 Monitor Manual

7
Zoom out
Zoom in
Previous page
1/19
Next page
7
Very poor Excellent
the exertion level will adjust itself automatically based
on your heart rate at any given time. To set the pulse
value press the MODE button and use the UP and
DOWN keys to program in the desired heart rate.
STOPPING THE EXERCISE.
Exercising with programmed data. As soon as the
programmed variables (time, distance,...) reach zero,
the monitor will emit 8 warning beeps and then halt.
If the ST/STOP button is pressed then exercising will
start again, using the same programmed parameters
as before.
Interrupting the exercise. You can stop the monitor
whenever you like by pressing the ST/STOP button.
RECOVERY TEST: FITNESS
This electronic device is equipped with a recovery test
function. This offers you the advantage of being able
to measure how long it takes your heart rate to recover
after having finished the exercise. Upon finishing the
exercise leave your hands on the pulse gauges and press
the “Recovery Test” button, this will start a one minute
countdown. Only the Time and Pulse rate function
read-outs will remain displayed. The electronic device
will measure your pulse rate during this minute. The
heart rate recovery time will be displayed on the Heart
rate line.
If, at any time during this minute, you decide to
abandon this test then press the “Test” button and
this will take you back to the main screen.
When the minute is up, the electronic device will work
out the difference and your fitness rating will be
displayed up on the screen: F1, F2,..., F5, F16; where
F1 is the best (fitness “Excellent”) and F6 the worst
(fitness “Very Poor”).
The comparison between the worked heart rate and
the recovery heart rate provides a fast, simple method
of gauging how fit you are. Your fitness rating is a
guideline that shows you how fast your heart recovers
after physical exertion. If you exercise regularly then
you will see your fitness rating improve.
The test will not work if the sensor is not positioned
correctly or if the letter “P” is shown on the screen.
USE OF THE HAND-GRIP On this model the pulse rate
is measured by placing both hands on the sensors (R),
located on the handlebar, as shown in Figure 4.
When both hands are placed on the sensors the heart
symbol on the screen will begin to flash and after a
few seconds your heart rate reading will be displayed.
If both hands are not placed correctly (Figure 5) then
the pulse function will not work.
If a “P” appears on the screen or the heart symbol
does not flash then make sure that both hands are
placed on the sensors and that connector (Z) is
connected at the back of the monitor (P).
TROUBLESHOOTING GUIDE
Problem: The display comes on but only the Time
function works
Solution:
a.- Make sure that the connection cable is connected.
Problem: The display does not come on or the
displayed segments are very weak
Solution:
a.- Check that the transformer is plugged in.
b.- Check the voltage output from the transformer.
Problem: Display segments of a function read-out are
not visible or error messages for a particular function
appear.
Solution:
a.-Check that cables (p) and (p1) are connected
properly. Please refer to the assembly manual,
figure 3.
b.-Check that cable (M) is plugged into the monitor
socket (N) correctly.
c.- If the above steps do not help then replace the
electronic monitor.
Avoid leaving the electronic monitor in direct sunlight
as this might damage the liquid crystal display. Similarly,
do not expose it to water or knocks.
BH RESERVES THE RIGHT TO MODIFY THE
SPECIFICATIONS OF ITS PRODUCTS WITHOUT
PRIOR NOTICE.
MONITOR RHYNO H492X Cod.0180080 28/7/04, 11:337
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BH Fitness H492 Monitor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BH Fitness H492 Monitor in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info