Manual BH Fitness G6508 Monitor (page 20 of 85) (English, German, Dutch, French, Italian, Portuguese, Spanish)

528720

Zoom out

Zoom in

1/85

OPERATING

INSTRUCTIONS.-

STARTING THE FAN. -

The monitor on this machine is fitted

with an air vent (D), Fig.2, through

which a FAN provides two air speeds,

LOW and HIGH. To switch the fan on

while exercising press the ON / OFF

key on the keypad, Fig.3, and the fan

will start. Whenever the monitor is

switched to PAUSE the fan will switch

off.

P0 MANUAL MODE.-

Once the monitor is on it will display

the profile and the letter “M” for

manual on the LED array (A) Fig.2,

and the welcome message on the

bottom alphanumeric screen (B) Fig.2.

By pressing the QUICK / START key

the machine will start in manual mode

after a 3 second countdown.

The flashing top LED array (A), Fig.2,

will indicate the current speed setting

for the exercise. By pressing the

speed 



 or speed –

––

– keys you can

vary the speed between twenty

different speed settings. You can also

increase or decrease the speed

settings by using the numeric keys (G)

Fig.3.

The bottom alphanumeric display (B),

Fig.2, will give alternating 10 second

read-outs of the following values:

SPEED (Metric system km/h or

imperial system mph); TIME;

CALORIES; PULSE RATE and the

second sequence will show TIME,

DISTANCE and INCLINE.

The program can be interrupted by

pressing the STOP key or the

EMERGENCY button at the bottom of

the screen. When the program is

stopped the bottom alphanumeric

screen (B), Figure 2, will display the

average values for EXERCISE TIME

(HH:MM:SS); DISTANCE

TRAVELLED (km); AVERAGE

SPEED (Km/h); CALORIES

CONSUMED (kcal) during the

exercise. These values will be

displayed twice every five seconds.

If, during the time it takes to display

these average values, no keys are

touched and no further exercise is

done and the STOP key is pressed,

the machine will go back to the

manual program.

PROGRAM MODE

This program has: 1 MANUAL profile

program; 8 pre-programmed

PROGRAM profiles; a user

programmable profile (USER) as well

as a male TEST, female TEST, and a

steady pulse rate (H.R.C) program.

INCLINATION AND SPEED

PROGRAM.-

Program setup.-

This software allows the user to select

inclination or speed programs.

With the inclination programs the

LEDs display on the monitor refers to

the level of inclination, whereas with

the speed programs the LEDs refer to

the current speed.

This software also allows you to set a

maximum speed.

With the monitor switched on, the top

LED array (A), Fig.2, will display the

profile and the letter “M” for manual.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of BH Fitness G6508 Monitor in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

BH Fitness G6508 Monitor Manual

Product: