Manual BH Fitness G6488 Monitor (page 9 of 39) (English, German, Dutch, French, Italian, Portuguese, Spanish)

528749

Zoom out

Zoom in

1/39

OPERATING INSTRUCTIONS.-

MANUAL MODE.

Pressing the START/STOP key will

light the MANUAL indicator on the set

of indicator lights (D) and the machine

will start within 3 seconds, shown by

a countdown on the TIME display, at a

speed of 1.0 km/h. You can increaseor

decrease the speed setting in

MANUAL mode by pressing the (+ -)

keys, between 1.0 – 16 km/h, The

machine will stop if you press the

START/STOP key or if you remove the

SAFETY KEY

PROGRAM MODE.-

This monitor has eight programs

(BODY FAT; HRC, MANUAL; P1; P2;

P3; P4; P5), programs (P1 to P5)

each have three elevation settings

(L1– L5), giving a total of 25 different

programs.

See pre-programmed program

graphs at the end of this manual.

By pressing the MODE key when the

machine is READY, the LED for

MANUAL mode will start to flash, use

the (+ -) keys to select a program

setting (P1 to P5), the corresponding

program LED will start to flash. Once

you have selected a program, press

the ENTER key to confirm it and the

LED will remain lit.

Use the (+ or -) keys to choose the

level and press ENTER to confirm.

Next the TIME display will start

flashing, only for L3-L5. Use the (+ or -

) keys to specify the duration of the

program (5 – 99 minutes). Each

program and level is divided into 12

elevation and speed stages. There is

a one minute warm-up period for the

first stage of all the programs. Press

the START/STOP key and the

machine will start to operate based on

the values it has been given. You can

change the elevation and speed

settings at any time during the

exercise by pressing the (+ or-) keys

on the monitor. As soon as the one

mi- nute warm-up has finished the

machine will start the chosen program.

EMERGENCY STOP.-

For the user’s maximum safety, this

unit is equipped with a safety key (g)

and a STOP / RESET button. The

safety key (g) must be slotted into its

housing (E), Figure 2, otherwise the

machine will not start.

When you are using the machine

always clip the cord on the safety key

to your clothing. Tugging on the cord

will pull the safety key out of its slot

and the machine will stop immediately.

To restart the machine simply put the

key back into the key slot. Remove

the safety key (g) whenever the

machine is not being used and keep it

out of children’s reach.

Pressing the red button marked

STOP/RESET will also stop the unit

immediately. To restart it, press the

button marked START again.

ELEVATION.-

The inclination function operates

independently of all other functions.

Each time that you set switch (L)

toposition I, as described in the

Starting section, Fig.1. the inclination

level that was last used will be

displayed.

To lower the inclination to zero with

the unit stopped, press and hold the

STOP key for 5 seconds.

If inclination is not at zero when the

START key is used to begin

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of BH Fitness G6488 Monitor in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

BH Fitness G6488 Monitor Manual

Product: