542469
11
Zoom out
Zoom in
Previous page
1/39
Next page
11
FAULT FINDING CHART
PROBLEM CHECKS SOLUTIONS
1.The monitor does not
switch on.
1) Make sure that the machine
is plugged in, the ON/OFF
switch in position 1 and that
the safety key is inserted.
1) Plug the machine into the
mains supply. Set the switch
to position 1 and insert the
safety key.
2.The monitor switches
on but the motor fails
to start.
2) Check that the current limiter
is pressed in.
2) Switch the machine off and
press the circuit breaker in.
Lubricate the treadmill band.
3.Walking motion is
jerky on the
treadmill.
3.a) Check that the belt is
lubricated.
3.b) Check the tension on the
sliding belt.
3.c) Check the tension on the
drive belt.
3.a) Lubricate the sliding belt.
3.b) Adjust the belt tension.
3.c) Adjust the drive belt
tension.
4.The machine stops
(the breaker trips).
4) Check that the band is
lubricated.
4) Reset the overload button
with the On /Off switch at „0“
and lubricate the treadmill
band.
5.Electrical shocks
through the handrail.
5) Check that the machine is
plugged into an earthed mains
socket.
5) Plug the machine into an
earthed mains socket.
6.The treadmill belt
skews off centre.
6.a) Check that the machine is
level on the floor.
6.b) Check that the machine
does not wobble.
ERROR CODES
Monitor screen
display E1
Cable fault.
Connect the wire well between top
controller and bottom controller
Monitor screen
display E2
Burst clash.
Operating with incorrect voltage;
Connect the motor wire again.
Monitor screen
display E3
No speed sensor signal
Replace the sensor light on the bottom
controller or speed sensor.
Monitor screen
display E5
Possible motor
overload.
Lubricate the belt.
Monitor screen
display E7
Safety key. Insert the safety key.
Do not hesitate to get in touch with us if you have any queries, by calling:
+44 0844 335 3988 service@bh-uk.co.uk
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BH Fitness G6432 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BH Fitness G6432 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info