528794
15
Zoom out
Zoom in
Previous page
1/52
Next page
15
FAULT FINDING CHART
PROBLEM CHECKS SOLUTIONS
1. The monitor
does not switch
on.
1)Make sure that the machine is
plugged in, the ON/OFF switch
in position I and that the safety
key is inserted.
1) Plug the machine into
the mains supply.
Set the switch to
position I and insert the
safety key.
2. The monitor
switches on but
the motor fails to
start.
2) Check that the current limiter
is pressed in.
2)Switch the machine off
and press the circuit
breaker in. Lubricate the
treadmill band.
3. Walking motion
is jerky on the
treadmill
3.a) Check that the belt is
lubricated.
3.b) Check the tension on the
sliding belt.
3.c) Check the tension on the
drive belt.
3.a) Lubricate the sliding
belt.
3.b) Adjust the belt
tension.
3.c) Adjust the drive belt
tension.
4. The machine
stops (the breaker
trips)
4) Check that the band is
lubricated
4)Reset the overload
button with the On/Off
switch at 0” and
lubricate the treadmill
band.
5. Electrical
shocks through
the handrail.
5) Check that the machine is
plugged into an earthed mains
socket.
5) Plug the machine into
an earthed mains
socket.
6. The treadmill
belt skews off
centre
6.a) Check that the machine is
level on the floor
6.b) Check that the machine
does not wobble.
6) Use the adjustable
feet to level the
machine.
ERROR CODES
Monitor screen displays E1 - Speed sensor fault.
Monitor screen displays E6-E7 - Elevation fault
Do not hesitate to get in touch with us if you have any queries, by calling:
902 170 25
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BH Fitness G639 Monitor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BH Fitness G639 Monitor in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info