528781
11
Zoom out
Zoom in
Previous page
1/39
Next page
11
With the machine ready, press the
PROGRAM key and P_01 will appear
on the display, by pressing the
PROGRAM key you can access the
programs (P1 to P9), once you have
chosen a program press the MODE key
and the word TIME will begin to flash.
Use the SPEED▲▼ keys to specify
the duration of the program (10 99
minutes). The monitor has a default
program setting of 15 minutes.
Press the START key and the
machine will start to operate after 3
seconds, shown by the countdown on
the central display, based on the
values it has been given.
You can change the speed settings at
any time during the exercise by
pressing the SPEED▲▼ keys, and
the inclination settings by pressing the
Incline keys.
USER PROGRAM MODE.-
The user programs allow you to design
the speed and inclination graphs with
reference to your fitness level.
With the machine ready, press the
PROGRAM key and P_01 will appear
on the display, by pressing the
PROGRAM key you can access the
user programs (U_01; U_02; U_03),
once you have chosen a program
press the MODE key and the first step
of the program you are designing will
be shown in the TIME/DISTANCE
window, (S_01), the SPEED/INCLINE
window will also be flashing.
Use the INCLINE keys to select
the inclination level you want for the
first stage (between 0 to12), press the
SPEED▲▼ keys to select the speed
that you want for the first stage
between 1 and 18 km/h).
Press the MODE key and this will take
you to the second stage (S_02) carry
out the same procedure as in (S_01)
varying the speed and inclination
settings for this stage, and so on up to
stage 20 to complete the User
Program Graph.
By pressing the MODE key you can
program a time limit for the exercise
(between 10 to 99 minutes).
If the programmed exercise time is 20
minutes then each stage will last 1
minute.
Press START and the machine will
start after a 3 second countdown,
shown on the central display.
EMERGENCY STOP.-
For the user’s maximum safety, this
unit is equipped with a safety key (g)
and a STOP button. The safety key (g)
must be slotted into its housing (E),
Fig.2, otherwise the machine will not
start.
When you are using the machine
always clip the cord on the safety key
to your clothing. Tugging on the cord
will pull the safety key out of its slot
and the machine will stop immediately.
To restart the machine simply put the
key back into the key slot.
Remove the safety key (g) whenever
the machine is not being used and
keep it out of children’s reach.
Pressing the red button marked STOP
will also stop the unit immediately.
To restart it, press the button marked
START again.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BH Fitness G6130 Monitor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BH Fitness G6130 Monitor in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info