542140
18
Zoom out
Zoom in
Previous page
1/52
Next page
18
FAULT FINDING CHART
PROBLEM CHECKS SOLUTIONS
1. The monitor does not
switch on.
1) Make sure that the machine is
plugged in, the ON/OFF switch in
position 1 and that the safety key is
inserted.
1) Plug the machine into the mains
supply. Set the switch to position 1
and insert the safety key.
2. The monitor switches on
but the motor fails to
start.
2) Check that the current limiter is
pressed in.
2) Switch the machine off and press
the circuit breaker in. Lubricate the
treadmill band.
3. Walking motion is jerky
on the treadmill.
3.a) Check that the belt is
lubricated.
3.b) Check the tension on the
sliding belt.
3.c) Check the tension on the drive
belt.
3.a) Lubricate the sliding belt.
3.b) Adjust the belt tension.
3.c) Adjust the drive belt tension.
4. The machine stops (the
breaker trips).
4) Check that the band is lubricated. 4) Reset the overload button with
the On /Off switch at „0“ and
lubricate the treadmill band.
5. Electrical shocks
through the handrail.
5) Check that the machine is
plugged into an earthed mains
socket.
5) Plug the machine into an earthed
mains socket.
6. The treadmill belt skews
off centre.
6.a) Check that the machine is level
on the floor.
6.b) Check that the machine does
not wobble.
ERROR CODES
Monitor screen displays E1 - Possible motor overload.
- Lubricate the belt.
Monitor screen displays E6-E7 - Elevation fault.
Hesitate to get touch with us if you have any queries, by calling:
902 170 258
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BH Fitness G-6446N loopband at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BH Fitness G-6446N loopband in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info