585414
19
Zoom out
Zoom in
Previous page
1/28
Next page
19
10. TROUBLE-SHOOTING
The following chart contains detailed procedures for checking
your saw, should you encounter a malfunction.
Before setting, operating, cleaning, maintaining or repairing
the processor, read the manufacturer’s operating and mainte-
nance instruction manual.
Type of trouble Possible causes Remedies
The saw doesn‘t start - Power supply is missing
- Faulty switch/plug
- Connect to power supply
- Replace switch/plug
The machine starts but
the blade does not run.
- Locking flange of the blade
shaft is not tight
- Tighten both the bolt and its
nut
Blade runs but in the
wrong direction
- Inverted phases - Change the polarity in the line
phase changer or in the switch.
The blade keeps chopping
the log
- Stump blade - Sharpen or replace the blade
Buzzing motor - Braking system is engaged - Stop the saw and switch it on
again after approximately 1 min.
11. OTHER AREAS OF POSSIBLE HAZARD
11.1 Mechanical dangers
Possible dangers related to machine moving parts (saw blade) are mi
-
nimized by means of suitable safeties and protections that cannot be
dismounted unless special tools and equipment is used.
Do not attempt to remove or by-pass any of the machine inbuilt safeties.
DANGER: removing or by-passing inbuilt machine safeties may result
into serious operator’s personal injuries.
11.2 Electrical dangers
All live electrical parts are duly grounded and isolated to prevent acci-
dental contact and danger of electric shocks. Do not ever attempt
to remove or by-pass any of the inbuilt electric safeties, linings and
protections.
DANGER: removing an electrical safety or protection lining may result
into serious injuries caused by electric shock.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BGU 701 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BGU 701 in the language / languages: English as an attachment in your email.

The manual is 2,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info