585414
13
Zoom out
Zoom in
Previous page
1/28
Next page
13
6.4 Consumables
Spessart 603: Circular blade (Code no.95002 CR and 95004 HM)
/602: Wooden strips (Code no. 54383)
Spessart 701: Circular saw blase (Code No. 95011 CR)
Wooden strips (Code No. 54387 and 95021 HM)
When the machine is fully obsolete and cannot be of any longer use, it should
be duly dismounted ahead of discarding. Certain components need deactivation
and dismantling in order to assure that no further use is made by other parties
and that no worn out parts are recycled for other applications. During dismantle
be alert for possible recyclable materials and components that belong to differen-
tiated waste collection procedures applicable in your country.
The manufacturer is not liable and undertakes no responsibility for personal inju-
ries or damages that may result from the recycling of worn out machine parts and
eventual re-use in other applications different than originally stated in this manual.
Dismantling procedure:
Take good note please: each and every dismantling task must be per
-
formed by authorized service centres or trained skilled staff only!
Pull the machine down into single components, lock and clamp all
moving machine parts
Deliver each single component only to authorized waste management facilities
Remove rubber and plastic parts from the machine that must be
separately disposed
Deactivated, clamped moving/driving parts and components are of no
further risk and danger.
Electric components must be separately disposed to avoid substantial environmen
-
tal threat. In the event of re on the electric deployment system of the machine,
use of an explosion-proof extinguish system is required (for example powder re
extinguishers).
8. DISPOSAL
7. TRANSPORT
Log & timber cutting saws are light equipment that can be easily moved on
short-distance by means of two wheels and an ergonomic, comfortable grip
handle located on the chassis on the opposite side as the log carriage. In or
-
der to avoid infringement of the clearance area around the machine, the grip
handle is retractable (push/pull) on both versions Spessart 601 and 701.
Simply fasten the grip and lift the saw for safe and rapid hauling of the
machine. For safety reasons the grip handle should remain retracted (or
lifted-up) during work to avoid risk of tripping or entanglement.
The machine is equipped with the following consumable parts for
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BGU 701 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BGU 701 in the language / languages: English as an attachment in your email.

The manual is 2,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info