Manual BFB 3DTouch (page 6 of 75) (English)

534706

Zoom out

Zoom in

1/75

3D Touch

Page 6

1. Introduction

Thank you for purchasing your 3D Touch.

Before first use, the 3D Touch needs careful setting up. The list below illustrates some of the essential operations which must be carried out before

operation:

Make sure the bed is clear of any build material

Check the bed is fitted correctly

Check the hot-end nozzles are clean from plastic debris

Check the bed is level

Check the bed is referenced to the extruder nozzles

Load the extruders correctly

Print a successful raft

Failure to carry out of the set-up procedures contained in this document will damage the machine.all

This document has been designed to illustrate the procedures and get you up and running as quickly as possible. Please take time toessential

understand how the process works and complete each procedure in the order set out in this manual. Setting up can take from 20-60 minutes

depending on the skill level of the operator.

Support is available by raising a ticket at www.bitsfrombytes.com

We welcome any feedback you may have, and wish you well in your 3D printing!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of BFB 3DTouch in the language / languages: English as an attachment in your email.

The manual is 11,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

BFB 3DTouch Manual

Product: