534707
18
Zoom out
Zoom in
Previous page
1/73
Next page
BFB-3000 Set Up and Operations Manual
Document No: D100253 18
6.5 Manual move
Get familiar with moving the axes around:
Ensure that the bed is fitted properly to the machine (see “Check the bed is fitted
correctly, page 14).
Using the buttons on the control panel (see “Power up, page 17) select the ‘Manual
move function and press enter:
RUN FILE
EXTRUDER MAPPING
>
MANUAL MOVE
EXTRUDER CONTROL
HOME TOOL HEAD
SETTINGS
Use X, Y and Z buttons to move each axis respectively (axes designated in Figure 2,
page 19).
Caution: Always move the Z axis first to ensure that bed is away from
the extruder nozzles, and does not collide during an X/Y move.
Collisions between the extruder nozzles and the bed may damage both.
Caution: Observe each X/Y axis movement. In these axes, it is possible
to drive the extruders too far away from the “Home” position (Figure 2)
into the printer frame. Avoid this. Excessive collisions will damage the
printer.
Caution: Observe each Z axis movement. In this axis, it is possible to
drive the bed too high (into the extruder nozzles) or too low (into the
motor coupling). Avoid this. Excessive collisions will damage the
printer.
Press Escape to leave the function, and return to the main menu.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BFB 3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BFB 3000 in the language / languages: English as an attachment in your email.

The manual is 8,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info