715700

Beurer WL 75 Manual

15
Zoom out
Zoom in
Previous page
1/60
Next page
15
7.6 Radio
Note
You can configure the radio settings using the “beurer
LightUp” app or the buttons on the wake up light.
Setting the radio station
To set the radio station using the buttons on the wake up
light, proceed as follows:
1.
Press the Set button on the device twice. “SET Radio”
appears on the display. Wait three seconds until the
current station frequency flashes on the display.
2. Use the
/ buttons to set the desired radio station.
To start the station search, press and hold the or
button. Confirm with the Set button.
3. Programme number P 01 flashes on the display. Use
the / buttons to select the desired programme
number (e.g. P 01 or P 02) under which the set ra-
dio station is to be saved. There are 10 radio memory
spaces available. Confirm with the Set button.
Switching the radio on/o
1. To switch the radio on or o, press the Radio button
on the wake up light.
2.
To switch between the saved radio stations, first press
the Set button. Use the / buttons to select the de-
sired radio station.
3.
To set the volume, press the / buttons while the
radio is playing.
7.7 Setting the display brightness
Note
The wake up light has four display brightness levels
(
0, 
1, 2 
and
 3
)
. You can set the display brightness in the
settings of the “beurer LightUp” app or using the but-
tons on the wake up light.
To set the display brightness using the buttons on the
wake up light, proceed as follows:
1.
Press the Set button on the device four times. “SET
Display” appears on the display. Wait three seconds
until a number flashes on the display.
2.
Use the / buttons to set the desired display bright-
ness. Confirm with the Set button. The configured dis-
play brightness is shown after 5 seconds.
Alternatively, you can also tap on the right-hand side of
the display to make the display brightness briefly brighter.
7.8 AUX connection
You can connect an external audio source (e.g. MP3
player, smartphone or CD player) to the wake up light
via the AUX input.
1. Connect the supplied AUX cable to an audio source.
2.
Insert the other end of the AUX cable into the AUX input
on the rear of the device.
3.
Press the AUX button on the device. The external audio
source is now connected to the wake up light.
4. Use the
/ buttons to adjust the volume.
5. Press the AUX button to exit AUX mode again.
7.9 Switching the button tone on/o
You can only switch the button tone of the wake up light
on and o via the settings in the “beurer LightUp” app.
7.10 Activating/deactivating Bluetooth
®
Note
The wake up light is supplied to the customer with
Blue-
tooth
®
activated. If you deactivate Bluetooth
®
, the wake
up light cannot be connected to the “beurer LightUp”
app.
To deactivate Bluetooth
®
on the wake up light, proceed
as follows:
1.
Press the Set button on the device five times. “SET ”
appears on the display. Wait three seconds until “on”
flashes on the display.
2.
Press the or button until “OFF” appears on the dis-
play. Confirm with the Set button. Bluetooth
®
is now
deactivated on the wake up light.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer WL 75 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer WL 75 in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 2,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info