533688
14
Zoom out
Zoom in
Previous page
1/80
Next page
14
1
. Press the ON/OFF button to start treatment.
If the safety lock is not turned to the closed position, the device cannot be switched
on.
2
. Select the desired speed using the speed controller.
3
. Select the desired direction of rotation using the buttons for clockwise and anti-clockwise
rotation.
4
. Do not press too hard and always carefully move the attachments towards the area to be tre-
ated. Move the device towards the area to be treated and apply slight pressure while slowly
moving the device in circles.
If a large amount of pressure is placed on the rotating attachment, the device automa-
tically switches off. Press the ON/OFF button again to switch the device back on.
5
. Apply moisturiser to the treated areas after each use.
5. Cleaning
Warning
Before beginning cleaning, always pull the mains adapter out of the socket!
•
Clean the base station and the hand-held device with a damp cloth. If it is very dirty, you can
also moisten the cloth with a mild soapy solution.
•
For hygienic reasons, you may use alcohol and a cloth or brush to clean the attachments. Al-
low the attachments to dry afterwards.
•
Do not use any chemical or abrasive cleaning agents.
•
Ensure that no water enters the device. If this should happen, reuse the device only when it
has fully dried out.
•
Do not submerge the base station and mains adapter in water or any other fluids.
6. What if there are problems?
Problem Possible cause Solution
Hand-held device will
not switch on.
Mains adapter not plugged in Insert the mains adapter into the
socket.
No voltage at mains socket Check your fusebox.
Hand-held device not connected to
base station.
Connect the hand-held device to
the base station.
7. Replacement parts and wearing parts
Replacement parts and wearing parts are available from the corresponding listed service
address under the stated material number.
Replacement part Material number
Fine sapphire cone 163.301
Coarse sapphire cone 163.302
Felt cone 163.303
sapphire wheel (fine) 163.304
Sapphire wheel, coarse 163.305
Cylindrical cutter 163.306
Flame-shape cutter 163.307
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer MPE 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer MPE 100 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 5,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info