568664
14
Zoom out
Zoom in
Previous page
1/96
Next page
14
2. Commencing operation
2.1 Information concerning the instrument
This manicure and pedicure device comes with high-quality attachments. The
supplied 10 attachments are made with durable sapphire coating / polishing felt.
Together with the continuously adjustable speed regulation and right/left rotati-
on, professional foot and nail care at the standard of a pedicurist is possible.
All the attachments can be easily integrated into the storage pouch of the
MP 62.
The integrated LED light additionally creates ideal light conditions during appli-
cation.
2.2 Power supply
To ensure adequate power at all times for good and powerful treatment of the
feet and nails, this instrument is provided with a permanently attached power
unit.
After use, before cleaning and changing any accessory parts, the po-
wer unit should always be disconnected.
Ensure that the sliding switch on the device is in the centre position (=
off) before you connect the device to a power supply.
3. Application
3.1 General
This instrument is intended only for the treatment of hands (manicure) and feet
(pedicure).
Make sure that the device is switched off beforehand.
Select an attachment and push it onto the instrument spindle using a slight
pressure. The attachments can be heard to engage. To remove: pull the at-
tachment and instrument apart in the axial direction (straight).
Turn the control ring to the left (anti-clockwise rotation) or to the right (clock-
wise rotation) to switch the device on. The LED lights up blue. The two buttons
marked with plus (+) and minus (-) allow you to select the speed of rotation.
Start every application at low speed and increase it only as required.
All file and cutting attachments are coated with a sapphire grain. This guaran-
tees extremely long life and almost guarantees freedom from wear.
Do not exert heavy pressure and always guide the attachments carefully over
the surface to be treated.
Move the instrument under light pressure in circular movements slowly over
the parts to be treated.
Note that the cutting attachments will have a reduced effect if the skin is sof-
tened or moist. For this reason, do not carry out any pretreatment in a bath.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer MP 62 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer MP 62 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 2,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info