695972
15
Zoom out
Zoom in
Previous page
1/88
Next page
15
Inserting a professional attachment
1
. Turn the safety lock to the open position and carefully push the selected professional at-
tachment onto the hand-held device, up to the stop.
2
. To lock the professional attachment in place, carefully turn the sealing ring onto the closed
position
.
3
. Attach the protective cap for nail dust to the tip of the hand-held device
from the top.
4
. Connect the hand-held device cable to the hand-held connection on the
base station.
Important
Make sure the speed controller is set to the lowest setting before connecting the mains adapter
to the mains electricity.
5
. Insert the mains adapter into the socket.
4. Operation
Warning
Check the results during the treatment. This applies in particular for diabetics as they have
less sensitive hands and feet. Stop treatment as soon as it becomes unpleasant.
Important
Ensure the axle can always rotate freely. Do not permanently block the axle as otherwise
the device may become hot and damage.
When filing, always move from the outside of the nail towards the tip!
Please observe that professional attachments show reduced performance on soaked
or wet skin. For this reason, we recommend that you do not soak the foot in water
before treatment.
1
. Press the ON/OFF button to start treatment.
If the safety lock is not turned to the closed position, the device cannot be switched
on.
2
. Select the desired speed using the speed controller.
3
. Select the desired direction of rotation using the buttons for clockwise and anti-clockwise
rotation.
4
. Do not press too hard and always carefully move the attachments towards the area to be tre-
ated. Move the device towards the area to be treated and apply slight pressure while slowly
moving the device in circles.
If a large amount of pressure is placed on the rotating attachment, the device automa-
tically switches off. Press the ON/OFF button again to switch the device back on.
5
. Apply moisturiser to the treated areas after each use.
5. Cleaning
Warning
Before beginning cleaning, always pull the mains adapter out of the socket!
Clean the base station and the hand-held device with a damp cloth. If it is very dirty, you can
also moisten the cloth with a mild soapy solution.
For hygienic reasons, you may use alcohol and a cloth or brush to clean the attachments. Al-
low the attachments to dry afterwards.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer MP 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer MP 100 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 3,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info