470391
13
Zoom out
Zoom in
Previous page
1/52
Next page
13
There must be no weight placed on the chair while you are adjusting seat height or back rest.
Secure the protective covers on the arm rests. Please make sure that you remove these before you fold
the chair together again.
Connect the power supply with the massager using the connector plug.
Connect the device to the mains by plugging the plug into the socket.
7. Operation
During first use, place the back rest in the most upright position possible.
Gently press your back against the massage device to start with. Then make sure that you are in a comfort-
able position before gradually shifting your weight onto the massage device.
The massage should feel pleasant and relaxing at all times. Stop the massage or change its position, the posi-
tion of the back rest or the seat height or contact pressure if you find the massage painful or unpleasant.
Do not force any part of your body, in particular your fingers, between the rotating massage heads and
their mountings in the device.
Sit comfortably on the massage chair and make sure that you lean against it with your entire back, that
you sit centrally and that the massage heads can move to the left and right of your spine.
Switch on the massager with the button.
The device starts automatically with the Shiatsu massage on the full back setting. The LED shows the
current massage region.
You can select other settings as described below:
1. Shiatsu massage
Press the SHIATSU button. Select the desired massage region with FULL BACK (button 2), UPPER BACK
(button 3) and LOWER BACK (button 4).
Spot massage, i.e. Shiatsu massage without vertical movement, can be selected by pressing one of the
two SPOT buttons (number 6). The position of the localised massage can be changed by pressing and
holding one of the two SPOT buttons until the desired position is reached.
Massage intensity
When using the Shiatsu Massage, two different massage speeds are available, which can be selected us-
ing the SPEED button. If you have the rolling massage activated, first press the SHIATSU button in order
to change to Shiatsu Massage and then set the desired massage speed.
2. Rolling massage
Press the ROLLING button. Select the desired massage region with FULL BACK (button 2), UPPER BACK
(button 3) and LOWER BACK (button 4).
When the massage type (Shiatsu or rolling massage) is changed, the preselected region (full, upper, lower
back) is retained. Note that the massage region must be selected again when switching from localised
Shiatsu massage to rolling massage.
Heating function
Press the HEAT button (button 5) to switch on the heating function of the massage heads. The blue lights
in the massage heads change colour to red.
•Usethemassagerformax.15minutesandthenleaveittocooldown.Longmassagescanleadtoover-
stimulation of the muscles, creating tension instead of aiding relaxation.
You can end the massage at any time by pressing the button . Please note that the massage heads must
first return to their start position when the device is switched off. This is indicated by a flashing LED light.
Once the position is reached, the device switches off.
• Ifthedeviceisstoppedbepressingamassageareabuttontwice,italsoreturnstothestartingposition
after 15 minutes and then switches off.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer MG 310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer MG 310 in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beurer MG 310

Beurer MG 310 User Manual - Dutch, Danish, Portuguese, Swedish, Norwegian - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info