470393
12
Zoom out
Zoom in
Previous page
1/52
Next page
12
7. Operation
The massage must be pleasant and relaxing at all times. Stop the massage or change your position or the
contact pressure if you find it is painful or unpleasant.
Do not force any part of your body, in particular your fingers, between the rotating massage heads and
their mountings in the device.
Lie down comfortably on the massager. Take care to ensure you are positioned in the middle of the mat
and that the massage heads to the left and right of your spine still have enough room to move.
Switch on the massager with the button.
The device starts automatically with the Shiatsu massage on the full back setting. The LED shows the
current massage region.
You can select other settings as described below:
1. Shiatsu massage
Press the SHIATSU button. Select the desired massage region with FULL BACK (button 2), UPPER BACK
(button 3) and LOWER BACK (button 4).
Spot massage, i.e. Shiatsu massage without vertical movement, can be selected by pressing one of the
two SPOT buttons (number 6). The position of the localised massage can be changed by pressing and
holding one of the two SPOT buttons until the desired position is reached.
2. Rolling massage
Press the ROLLING button. Select the desired massage region with FULL BACK (button 2), UPPER BACK
(button 3) and LOWER BACK (button 4).
When the massage type (Shiatsu or rolling massage) is changed, the preselected region (full, upper, lower
back) is retained. Note that the massage region must be selected again when switching from localised
Shiatsu massage to rolling massage.
Heating function
Press the HEAT button (button 5) to switch on the heating function of the massage heads. The blue lights
in the massage heads change colour to red.
Use the massager for max. 15 minutes and then leave it to cool down. Long massages can lead to over-
stimulation of the muscles, creating tension instead of aiding relaxation.
You can end the massage at any time by pressing the button . Please note that the massage heads
must first return to their start position when the device is switched off. This is indicated by a flashing LED
light. Once the position is reached, the device switches off.
If the device is stopped be pressing a massage area button twice, it also returns to the starting position
after 15 minutes and then switches off.
Do not disconnect the device from the mains supply during operation. Always switch it off first and wait
until it has returned to the initial position.
Disconnect the power supply unit plug from the mains after using the device.
Note
The device has an automatic shut-off mechanism set to a maximum operating period of 15 minutes.
8. Care and storage
CLEANING
WARNING
Before cleaning disconnect the power supply unit from the mains socket and disconnect it from
the device.
Only clean the appliance in the manner specified. Fluid must never be allowed to enter into the
device or accessories.
Smaller stains can be removed using a cloth or moist sponge together with a little liquid detergent
for delicate fabrics if necessary. Do not use any cleaning agents containing solvents.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer MG 230 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer MG 230 in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beurer MG 230

Beurer MG 230 User Manual - Dutch, Danish, Portuguese, Swedish, Norwegian - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info