533575
10
Zoom out
Zoom in
Previous page
1/52
Next page
10
6. Operation
Ensure that the device is switched off before plugging in the mains cable. Switch on the device using the On/off button.
The start program starts.
The massage speed can be increased/decreased by one setting as required by pressing the “Speed” button.
You can choose between 3 different massage programs (with automatic speed settings) by pressing the “Programs”
button.
- Relax: A wave-action, relaxing massage.
- Vital: Vibrant and pulsating massage.
- Active: Penetrating and pulsating massage.
The infrared heating can be switched on in any massage program, using the “Heat” button.
Guide the device with both hands to the area of the body to be massaged. You can stand, sit or lie down and can mas-
sage yourself or another person. The massage intensity can be altered by pressing more or less firmly with the massage
device. Do not massage a certain site of the body for longer than 3 minutes and then change to other area of the body.
After using for a maximum of 15 minutes, unplug the device and let it cool down. Keep the device dry.
Note
Do not use the massage device just before going to bed. The massage can also have a stimulating effect
and may cause difficulties in getting off to sleep.
The device has an automatic shut-off mechanism set to a maximum operating period of 15 minutes.
WARNING
The massage must be pleasant and relaxing at all times. Stop the massage or change the position of the
massage device if you find it is painful or unpleasant.
Do not jam or force any part of your body, in particular your fingers, into the area of the massage head.
7. Care and storage
Cleaning
To clean the unplugged and cooled device, wipe with a slightly damp microfibre cloth. Then you can clean it with
a cloth which is no more than lightly moistened. You can also use a mild detergent.
WARNING
Disconnect the device before cleaning it.
Only clean the appliance in the manner specified. Fluid must never be allowed to enter into the device or
accessories.
Do not use the device again until it is completely dry.
Storage
Keep the massage device in a cool and dry place where it is out of the reach of children. We recommend storing
the device in its original packaging.
8. In the event of problems?
Problem Cause Remedy
Massage head does
not move.
Appliance not connected
to the power supply.
Connect the plug to the mains supply and
switch on the appliance.
Device is not does not move. Switch on the appliance.
Overheating protection
tripped.
Disconnect device from mains power, wait at
least 15 minutes, plug in again and switch on.
9. Technical data
Dimensions (W/H/D) ~ 160/150/450 mm
Weight ~ 1740 g
Rated output 20 W
Rated voltage 220-240 V ~ 50 Hz
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer MG 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer MG 100 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 2,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info