619810
15
Zoom out
Zoom in
Previous page
1/68
Next page
15
5. Initial use
Remove the transport lock
Open the cardboard packaging.
Keep the plastic covering closed and lift the device out using the handle recesses on the upper cover.
Now remove all plastic films.
Check the device, mains plug and cable for damage.
Lift off the upper cover with the fan unit, lift out the humidification discs at the holder and remove the
transport lock from the tub and the fan unit. Check whether all transport locks have been removed.
Reinsert the humidification discs. The holder automatically falls to the side and the humidification discs
are secured. Make sure that the red spot is on the top of the holder.
Fill with water
When filling with water, disconnect the plug from the mains.
To fill the tub, lift out the upper cover with fan unit by the side handle recesses and place to one side.
During filling, leave the humidification discs in the tub. Fill the tub with fresh, cold tap water at most up
to the lower edge of the “MAX” marking (7.2 l) on the inside of the tub. The most straightforward way to
do so is to use a large container free of limescale and impurities (water can, jug). Use only fresh, cold tap
water. For optimum humidification output, we recommend filling the tub with water up to the “OPT” mark
(3.6 l).
Place the upper cover with integrated fan unit on the tub. If the upper cover cannot be placed precisely
onto the tub, turn the upper cover around by 180 degrees. This is a design feature and ensures that the
fill level sensor contacts touch each other. Never use force to place the upper cover on the tub. Otherwise
the device will be damaged.
Note:
Optionally, you can add a small amount of soluble aromatic oils to the water. This releases a fragrance
into the air.
Important
Ensure the water level in the tub with inserted humidification discs never exceeds the lower edge
of the “MAX” marking on the inside of the tub.
Tip: The addition of a small volume of conventional washing-up liquid (e.g. 1 drop) breaks the water
surface tension and increases evaporation output.
Positioning the device
Place the humidifier on a firm, even, water-resistant surface.
Position the air washer in the vicinity of a heater to improve evaporation, in particular in large rooms
(donotexceed a max. temperature of 50 °C). Always ensure that the air inlet and air outlet remain clear
and that the air flows freely.
Insert the mains plug into the socket. Ensure that the cable does not pose a trip hazard. You can clamp
the mains cable in the vertical ridge on the rear of the tub and lead it downwards.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer LW 220 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer LW 220 in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 2,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beurer LW 220

Beurer LW 220 User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info