Manual Beurer LR 500 (page 22 of 100) (English, German, French, Italian, Polish, Turkish, Spanish)

715709

Zoom out

Zoom in

1/100

5. Re-insert the housing cover as shown until you

feel and hear it click into place (magnetic fasten-

ing). First attach the magnetic fastening at the

bottom, and then at the top.

Insert the mains plug into the socket. Ensure that

the cable does not pose a trip hazard. Press the

ON/OFF button. Now open the ﬂap on the side

of the device housing. A button is located here

to set the operating hour counter to 0.

If you wish to change the combi ﬁlter at speciﬁc personal intervals (e.g. every 6 months), there is a stick-

er on the upper edge of the combi ﬁlter on which a date can be entered.

7. Cleaning and storage

WARNING

Before cleaning, always ensure that the mains plug of the air puriﬁer has been properly disconnected.

7.1 Cleaning the ﬁlter

Regular cleaning of the ﬁlter (once a month) is a prerequisite for hygienic and fault-free operation.

•

Clean the three-layered ﬁlter using the brush attachment of a vacuum cleaner. To carry out a thorough clean,

pull out the pre-ﬁlter and clean the activated carbon ﬁlter located behind it and the HEPA ﬁlter located at the

rear, also using the brush attachment from a vacuum cleaner. Then replace the pre-ﬁlter on the HEPA ﬁlter.

Activated carbon ﬁlter HEPA ﬁlter H 13

Front Rear

IMPORTANT

The three-layered ﬁlter should be changed after 4320 operating hours (see “Filter change” section).

The three-layered ﬁlter cannot be washed.

7.2 Cleaning the PM 2.5 ﬁne dust particle sensor

The ﬁne dust particle sensor should be cleaned every 2 months.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Beurer LR 500 in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 7,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Beurer LR 500 Manual

Product: