470479
11
Zoom out
Zoom in
Previous page
1/48
Next page
11
Do not add any essential oils or fragrances to the water. This would damage the ultrasonic
source.
Operate the air humidifier only when it has been completely assembled and is fully
functioning.
Use a plastic bottle no larger than 0.5 litres or fill a bottle with a maximum of 0.5 litres. Otherwise,
the raised water pressure may cause the air humidifier to overflow.
Operate the air humidifier only with top and mist outlet mounted so as to avoid splashing in the
vicinity.
Never use liquids other than water.
Please observe the safety notes and the additional notes so as to avoid damage.
Initial use
Remove the packaging material.
Check the device, mains plug and cable for damage.
Place the air humidifier on a even, firm, flat and humidity-resistant surface. Ensure that the air humidi-
fier cannot be knocked over.
Position the air humidifier in a raised place, e.g. a table, chest of drawers, chair or bedside table. To
avoid damage from the escaping mist, the device must not be placed on the floor.
Ensure than the top is placed firmly on the base. Pull the mist outlet upwards until it noticeably engages.
For this purpose, you must overcome the rest resistance in the initial position with a forceful tug.
Make sure that the escaping mist is not directed at the bottle, wall, plug socket or other objects and
that the air outlet always remains free.
Fill a 0.5 litre plastic water bottle with clean tap water, distilled water or still water. Do not use carbon-
ated water. The manufacturer expressly recommends the use of distilled water so as to avoid limescale.
The water temperature may be a maximum of 50 °C, so as to avoid damage to the device.
Fasten a bottle adapter onto the bottle. There are two adapters available that fit most standard plastic
bottles:
1. “PC 1810” thread with a thread diameter of 28 mm and
2. “30/25” thread with a thread diameter of 30 mm.
Turn the bottle upside down and place it in the top of the air humidifier. Do not compress the plastic
bottle. The base will fill with water automatically.
Connect the power supply unit connector plug with the connector socket of the air humidifier and
insert the power supply unit into the socket. Ensure that the cable does not pose a trip hazard.
Turn the control dial clockwise (to the right) to switch on the air humidifier.
Use the device and switch off.
IMPORTANT
The immediate vicinity of the air humidifier may become damp. Reduce the nebulisation per-
formance or put the device in a more suitable place.
Calcareous water can leave white deposits. Use distilled water instead.
If the device should accidentally tip over, water may escape, even if the device is switched off
and unplugged.
Check the humidity of your ambient air regularly. Intensive continuous operation can cause the
ambient air to become excessively humid. The relative air humidity should not exceed 60%.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer LB 12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer LB 12 in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beurer LB 12

Beurer LB 12 User Manual - Dutch, Danish, Portuguese, Swedish, Norwegian, Finnish - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info