Manual Beurer LAS50 (page 17 of 155) (English, German, Dutch, French, Italian, Polish)

715730

Zoom out

Zoom in

1/155

Tria Beauty

HOW TO TREAT

1. TURN ON THE LASER, UNLOCK IT AND SET

THE TREATMENT LEVEL (SEE PAGES 12-13)

2. TOUCH THE TREATMENT WINDOW TO

THE SKIN. WHEN YOU HEAR A SINGLE

BEEP IMMEDIATELY LIFT THE DEVICE

AND MOVE TO STEP 3

• If you do not hear a beep within a few

seconds, make sure that the treatment

window is flat against your skin. The laser

will only pulse when the entire window is

touching your skin.

• If you hear a buzzing tone instead of a beep,

you lifted the device from the skin before

the pulse was over. It is normal for time

between beeps to lengthen as you progress

through each treatment. This should not

affect your results.

NOTE: It is normal for the cooling fan to turn

on and emit warm air through the bottom

vent as soon as you unlock your device.

You can continue treatment while this is

happening and do not need to wait for the

fan to turn off before treating the next area.

3. PLACE THE LASER BACK ON THE

SKIN SO THAT IT OVERLAPS THE

PREVIOUS AREA

• Each time you reposition the treatment

window, move it about half the distance of

the window (about 1/4 inch or 5 mm) in a

stamping motion.

• This creates an overlapping pattern in the

treatment area, which ensures you cover all

the hair follicles. This works out to about 25

laser pulses per square inch or 40 pulses per

10 square cm.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Beurer LAS50 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 10,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Beurer LAS50 Manual

Product: