568840
18
Zoom out
Zoom in
Previous page
1/76
Next page
18 19
Camera control
You can set the following parameters for your camera here:
Brightness, Contrast, Saturation and Frame Rate.
• In order to be able to set the parameters, you must first select the channel
number of your camera (e.g. CH1, CH2, etc.) with the arrow buttons.
Confirm your selection with the OK/Menu button. Now you can adjust the
individual parameters of the camera with the arrow buttons.
• To exit the menu again, press the On/O button.
Version
The software version that is currently being used on the device can be read
o here.
Default
Resets all settings to the factory settings.
If no button is pressed for five seconds, or the On/O button is pressed, the
settings menu disappears.
Resetting the device to factory settings
To reset the device to factory settings, use a sharp object to press the reset
button on the monitor and on the camera.
8 Technical data
• 16 channels
• Frequency 2.4 - 2.483 GHz
• Digital receiver
• 2.4" TFT display
• Infrared technology
• ECO mode
• Dimensions: camera Ø 82 mm x 75 mm / base: Ø 90 mm /
monitor: 130 x 76 x 31 mm / stand: 105 x 64 x 45 mm
• Weight: camera 93 g; monitor 117 g; battery 80 g
• 200 m range with a clear view
Operation Camera and monitor mains part plug:
input: 100-240 V ~50/60 Hz, 200 mA;
output: 5 V
1 A
Monitor:
Lithium ion battery 3.7 V; 900 mAh
Battery life
(dependent on battery state,
ambient temperature, method and
frequency of charging, etc.)
Monitor: approx. 9 hours in ECO mode
approx. 5 hours in LCD mode
9 Useful information about the baby monitor
• If you operate the monitor with the battery, this minimises electrosmog
from electrical and magnetic alternating fields.
• You can increase the range of the baby monitor by positioning the camera
as high up as possible near a door or window and ensuring that the
battery is not too weak.
• Other radio waves may interfere with the transmission of the baby monitor.
Therefore, do not position the baby monitor near devices such as micro-
waves, WLAN, etc.
• The following other factors can interfere with the baby monitor's trans-
mission or shorten its range: furniture, walls, houses, trees, environmental
factors (such as fog, rain).
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer JBY 103 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer JBY 103 in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 2,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info