568800

Beurer IPL 9000 plus Manual

32
Zoom out
Zoom in
Previous page
1/124
Next page
32
notice extreme reddening, swelling or blistering even at a low energy level, do not perform a full treat-
ment on this area.
Note
Do not perform a full treatment with an energy level that you have not tested beforehand!
Do not treat the tested area until at least one week after performing the test.
STEP 3: Plan hair removal using the beurer SalonPro System for the best results
A typical hair growth cycle can last 18 to 24 months. During this time, several sessions using the beurer
SalonPro System may be necessary to achieve lasting hair removal.
The effectiveness of the hair removal differs from person to person and varies depending on the area of
the body and hair colour, as well as on how the beurer SalonPro System is used.
Typical hair removal plan using the beurer SalonPro System over a complete hair growth cycle:
• The first three or four hair removal sessions using the beurer SalonPro System should be performed
around two weeks apart.
• The fifth to seventh hair removal sessions using the beurer SalonPro System should be performed
around four weeks apart. Afterwards, you will use the beurer SalonPro System from time to time as
necessary, until lasting results are achieved.
This corresponds to the recommended treatment plan that has proven to achieve the best results. You
can, however, create a different personal treatment plan and still achieve satisfactory results.
Note
The hair removal results cannot be improved by treating the same part of the body more than once
within two weeks.
Typical aftercare with the beurer SalonPro System after achieving lasting hair removal:
Due to hormonal or other physiological changes, resting hair follicles can become active. For this rea-
son, hair removal sessions for aftertreatment using the beurer SalonPro System may be necessary from
time to time.
STEP 4: Prepare the treatment area
Before the treatment, ensure that the skin is shaved, clean and dry (free from any residue such as pow-
der, cream, make-up, antiperspirant or deodorant).
WARNING
Do not clean the skin with flammable liquids such as alcohol or acetone shortly before using the beu-
rer SalonPro System.
STEP 5: Set the energy intensity level
Energy level
The energy level determines the intensity of the light pulse emitted by the beurer SalonPro System onto
your skin (from the lowest level (-) to the highest level (+)). The corresponding energy indicator lamps on
the base unit indicate the increase in energy level. As the energy level increases, so do the hair removal
results and the risk of possible side effects and complications.
Always start your first hair removal session with the beurer SalonPro System using the lowest energy
level setting. If during and after your first hair removal session using the lowest energy level you notice
slight or no irritation, increase the energy level for the next session by one level and so on for each sub-
sequent session.
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer IPL 9000 plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer IPL 9000 plus in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 7,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info