Manual Beurer IPL 7500 (page 36 of 128) (English, German, Dutch, French, Italian, Turkish, Spanish)

715734

Zoom out

Zoom in

1/128

Application method 1 “ﬂ ash-glide function”:

Hold down the trigger button. The device emits a series of consecu-

tive light pulses so long as the skin contact sensor is in full contact

with the skin. Move the device onto the next area after each light

pulse. Continue to hold the light area down on the skin. This mode

is suitable for treating larger areas in particular, for example the legs.

Application method 2 “releasing individual ﬂ ashes”:

Release the trigger button after each light pulse. For the next light

pulse, position the device on the area directly next to the area that has just been treated.

Ensure that the light area and skin contact sensor come into full contact with the skin. This

mode guarantees precise treatment, e.g. for knees or ankles.

Note

If the device does not emit any light pulses and the indicator lamp is orange, this indicates

that there is not enough contact between the skin sensor and the skin.

If the device does not emit any light pulses and the indicator lamp is red, this indicates that

the skin surface to be treated is too dark.

Note

Allow the device to cool for a few minutes if it seems too hot for you. You can continue your

treatment as normal after a short cooling period.

6.2 Special instructions for facial treatments

WARNING

•

Men must not use this device on the face.

•

Do not use the device on the face at an energy level higher than 2. Do not use the device

on the face above the cheekbones or on the eyes, eyebrows or eyelashes, as this could

result in severe damage to the eyes. Do not use the device on mucous membranes in

the nose or throat area.

•

The skin on your face is very sensitive and requires special care. Observe all warning and

safety notes in these instructions for use to prevent adverse consequences. We recom-

mend that you ﬁ rst perform a treatment on your body and get to know the device before

performing facial treatment. The device can be used to treat all areas of the face below

the cheekbones, such as the upper lip, cheeks, jaw, chin and neck.

1. You must carry out a skin sensitivity test 48 hours before treatment (see section 5.1). The

skin sensitivity test should be performed on an area without hair, such as below the ear

or on the side of the neck, to determine the suitable energy level.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Beurer IPL 7500 in the language / languages: English, German, Dutch, French, Italian, Turkish, Spanish as an attachment in your email.

The manual is 5,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Beurer IPL 7500 Manual

Product: