620035
13
Zoom out
Zoom in
Previous page
1/60
Next page
13
• Do not use the device on synthetic hair – risk of fi re!
Note
Remove all packaging material before using the device.
Only connect the device to a socket using the voltage specifi ed on the type plate.
If you do not know the local mains voltage, request it from the relevant organisation.
• Only pull the mains cable from the socket by the mains plug.
Do not use any additional parts that are not recommended by the manufacturer or o ered as accessories.
Under no circumstances should you open or repair the device yourself, as faultless functionality can no
longer be guaranteed thereafter. Failure to comply will result in voiding of the warranty.
In the event of a fault or damage, have the device repaired by a certifi ed specialist workshop.
• Never leave the device unattended during use.
• Do not use the device outside.
If you pass on the device to someone else, make sure to also pass on these instructions for use.
6. Operation
Warning
Position yourself on a dry, non-conductive surface. Risk of electric shock!
• Make sure that your hands are dry! There is a risk of electric shock!
The heated brush [3], the curling brush [2] and the device may become very hot depending on the switch
setting and period of use – risk of burns and fi re! Do not touch the heated brush [3] or the curling brush [2].
• Place the device on fi reproof surfaces only. Risk of fi re!
Ensure that no hair can be directly sucked into the device. Risk of fi re!
Important
• Do not jam the mains cable [11] in drawers or doors, for example.
• Untangle the mains cable [11] if it is twisted.
Do not pull, twist or bend the mains cable [11] and do not pull or route it over/on sharp, pointed objects or
hot surfaces.
Note
A slight odour initially develops after switching on the device for the fi rst time. This is normal and not harmful
to your health. Allow the device to run for three to fi ve minutes. After that you can use the device as normal.
• For your safety, the device switches o automatically if it overheats.
Pull the mains plug out of the socket and allow the device to cool down.
Before switching the device back on, check the air outlet [4] and the air intake fi lter [8] for any blockages
(e.g. sucked-in fl u , dust or hair).
6.1 General instructions for use
Step 1: Attaching/removing the brush attachment
> To attach a brush attachment to the hot air brush, place the required brush
attachment on the hot air brush and carefully turn it right and left until you see
and hear it click in place.
> To remove a brush attachment from the hot air brush, hold down the unlock
button [1] on the brush attachment and pull the attachment o the hot air
brush.
> Allow the heated brush [3] and the curling brush [2] to cool before you remove
them.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer HT 80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer HT 80 in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 5,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beurer HT 80

Beurer HT 80 User Manual - Dutch - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info