620032
18
Zoom out
Zoom in
Previous page
1/88
Next page
18
• Do not use the device outside.
• If you pass the device on to someone else, make sure to also pass on these
instructions for use.
7. Operation
Warning
• Position yourself on a dry, non-conductive surface.
Risk of electric shock!
• Ensure that your hands are dry.
Risk of electric shock!
• Your hair must be dry!
Risk of electric shock!
• The device can become very hot depending on the temperature setting and the
duration of use. When the device is hot, it must only be held using the handle –
risk of burns and fire!
• Do not touch the hot plates [1]. Risk of burns!
• Do not clamp objects between the hot plates [1].
• Switch the device o immediately if it is faulty or not working properly.
Important
• Untangle the mains cable [11] if it is twisted.
• Do not pull, twist or bend the mains cable [11] and do not pull or route it over/on
sharp, pointed objects or hot surfaces.
• Do not jam the mains cable [11] in drawers or doors, for example. The risk of
electric shock is increased if the mains cable is damaged or tangled.
Straightening/shaping hair
> Unlock the hair straightener by moving the lock button [8] to the open position.
> Press the on/o switch for two seconds [7].
- The unit is shipped with a default temperature setting for normal hair (100 °C).
- The heat-up phase is shown by the flashing °C symbol [2a].
- The selected temperature has been reached if the °C symbol is continuously
illuminated [2a].
- After about 30 seconds, the straightener is ready for use.
Adjusting the temperature
>
You can increase or decrease the temperature in 20 °C increments using the +/–
buttons [5, 6].
> The current temperature setting is shown on the LED temperature display [2]. The
temperature can be fixed by pressing the on/o switch [7] twice. The locked sym-
bol appears on the display. You can only switch o the hair straighteners if the
button lock is deactivated. To deactivate the button lock, press the on/o switch
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer HS 80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer HS 80 in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 3,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beurer HS 80

Beurer HS 80 User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info