715992

Beurer HS 60 Manual

11
Zoom out
Zoom in
Previous page
1/44
Next page
11
•
Switch the device o immediately if it is faulty or not working properly.
IMPORTANT
•
Untangle the mains cable [7] if it is twisted.
•
Do not pull, twist or bend the mains cable [7] and do not pull or route it over/on sharp, pointed objects or
hot surfaces.
•
Do not jam the mains cable [7] in drawers or doors, for example. Damaged or tangled mains cables increase
the risk of electric shock!
Straightening hair
1. Ensure that your hair is clean, dry, unknotted and free of styling products (the exception to
this is special products designed to help straighten hair).
2. Insert the mains plug into a socket.
3. To switch on the hair straightening brush, press and hold the ON/OFF
switch [5] for three seconds. The
operation indicator glows red.
4.
Use the +/- buttons
[4]
to set the desired temperature according to the type of hair. The temperature display
[3]
flashes during the heat-up phase. When the desired temperature has been reached, the temperature display
will light up permanently. The temperature can be fixed by pressing the on/o switch [7] twice. "LOC" appears
on the temperature display [3]. You can only switch o the hair straighteners if the button lock is deactivated.
To deactivate the button lock, press the on/o switch [7] again 2 times. "LOC" disappears from the temper
-
ature display [3].
5. We recommend the following temperature setting depending on your hair type:
120 °C to 140 °C For fine, brittle, coloured or bleached hair
140 °C to 160 °C For normal hair
160 °C to 200 °C Thick and resistant hair
6.
Part the hair into individual sections of approximately 6 to 7 cm. Hold
the strands taut.
7. Slowly move the hair straightening brush from the roots to the tips in a
fluid motion. Do not hold the hair straightening brush in one place for
more than two seconds. This will achieve the best results without sub-
jecting your hair to excess stress or damage.
8.
You can style the ends of your hair by turning the hair straightening brush
inwards or outwards before running it over the tips of the hair.
WARNING
To avoid burns, do not touch the bristles during use.
Note
The hair straightening brush has an automatic switch-o function. The hair straightening brush switches o
automatically after 30 minutes.
After use
1. To switch o the hair straightening brush, press and hold the ON/OFF switch [5] for three seconds. The
operation indicator [2] turns o and
OFF is displayed in the temperature display. The hair straightening brush
is now turned o.
2. After each use, pull the mains plug out of the socket.
3.
Place the hair straightening brush on a non-flammable surface. Allow the hair straightening brush to cool
down completely.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer HS 60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer HS 60 in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 3,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info