620030
15
Zoom out
Zoom in
Previous page
1/68
Next page
14 15
6. Operation
Warning
• Position yourself on a dry, non-conductive surface.
Risk of electric shock!
• Ensure that your hands are dry.
Risk of electric shock!
• Your hair must be dry!
Risk of electric shock!
• The device can become very hot depending on the temperature setting and the duration of use.
When the device is hot, it must only be held using the handle – risk of burns and fire!
• Do not touch the hot plates [1]. Risk of burns!
• Do not clamp objects between the hot plates [1].
• Switch the device o immediately if it is faulty or not working properly.
Important
• Untangle the mains cable [6] if it is twisted.
• Do not pull, twist or bend the mains cable [6] and do not pull or route it over/on sharp, pointed
objects or hot surfaces.
• Do not jam the mains cable [6] in drawers or doors, for example. The risk of electric shock is
increased if the mains cable is damaged or tangled.
Note
• The higher the temperature selected, the faster you will achieve the desired result.
• If you use the maximum temperature, do not go over the same section of hair more than once.
Straightening/shaping hair
> Dry your hair completely before using the straightener.
> Your hair should be clean and free of styling products. Exceptions to this are special products that
aid straightening of the hair.
> Comb your hair with a wide-toothed comb to untangle it.
> Unlock the hair straightener at the locking mechanism [7] by pushing outwards.
> Turn the dial [3] to the desired temperature setting.
> The heat-up phase is indicated by the heat ready indicator [2] flashing.
> A light-emitting diode (LED) [2] illuminates continuously to indicate that the selected temperature
has been reached.
> After about 30 seconds, the straightener is ready for use.
> Divide your hair into individual strands with a width of about 3 to 4 cm. Hold the strands taut and
place them between the heating plates [1] at the roots.
> Move the straightener slowly and smoothly from the roots to the ends. Do not keep the straighte
-
ner at any one place for longer than two seconds. This way you will obtain the best results without
overstraining or damaging your hair.
> You can shape the ends by twisting the straightener either outward or inward before you pull it out
over the ends.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer HS 30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer HS 30 in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 2,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beurer HS 30

Beurer HS 30 User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info