715727
23
Zoom out
Zoom in
Previous page
1/100
Next page
23
attachment, we recommend you initially start with the longest cutting length
so that you can slowly work your way to your desired length. Turn the selection
dial on the length-adjustable comb attachment to select the required trim-
ming length. The settings on the dial correspond to hair length in millimetres.
Press the ON/OFF switch to switch on the device. The operating display
begins to light up.
Guide the device slowly through the body hair. Ensure that the stainless steel
razor blade sits as flat against the body as possible.
Always only trim small areas.
Cut the hair against the direction of growth. If the hair grows in dierent di-
rections, use the device in multiple directions.
Press the ON/OFF switch again to switch o the device after use. The
operating display turns o.
9. Cleaning and maintenance
Cleaning the device
WARNING
Always pull the mains adapter out of the socket before cleaning the device.
Risk of electric shock!
Remove the length-adjustable comb attachment before cleaning.
Only clean the housing of the device with a soft cloth dampened with warm
water.
Do not clean the device with highly flammable liquids. Risk of fire!
Do not clean the device in the dishwasher.
Clean the stainless steel razor blade and the length-adjustable comb attach-
ment after each use to prevent lots of hair getting jammed inside, which could
otherwise impede flawless operation.
Leave the length-adjustable comb attachment to dry completely before you re-
attach it to the device.
If you do not use the device for a long period of time, place the protective cap
over the stainless steel razor blade and store the device and the length-ad-
justable comb attachment in the storage bag supplied.
Cleaning the stainless steel razor blade
After use, blow on the length-adjustable comb attachment and the stainless
steel razor blade to remove any hair from them. You can also carefully remove
wet hair with your fingers.
WARNING
When cleaning using your fingers, ensure that you do not injure yourself on the
sharp edges of the stainless steel razor blade.
To clean the stainless steel razor blade particularly thoroughly, you can also
rinse it under running water. To do so, proceed as follows:
1. Carefully grasp the stainless steel razor blade from below
using your thumb and index finger. Pull the stainless steel
razor blade up and o.
When removing the stainless steel razor blade, ensure
you do not injure yourself on the sharp edges.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer HR 6000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer HR 6000 in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 8,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info