470418
30
Zoom out
Zoom in
Previous page
1/44
Next page
30
6. Precautions – How to use SensEpil™ by beurer safely
Choose your energy levels CAREFULLY!
Energy level refers to the intensity of the light pulse that is projected on your skin during use, from the lowest level (-)
to the highest level (+).
INDICATOR LIGHTS on the CONTROL PANEL illustrate the energy level at which the machine is set. As
the energy level increases, so do the results of SensEpil™ by beurer as well as the risk of side effects (see “Possible Side
Effects” below).
Always begin your fi rst use of SensEpil™ by beurer at the lowest energy setting (one light at “-”)!
Only if you experience little or no discomfort during and after use of SensEpil™ by beurer at the lowest energy setting,
raise the energy level by one
INDICATOR LIGHT the next time you use SensEpil™ by beurer, and so on for each subsequent
hair removal session.
For detailed instructions on energy level setting see “Energy Level” box in the “Treating with SensEpil™ by beurer for
the fi rst time” section.
Avoid adverse effects!
Do not treat the same area of skin more than once per hair removal session!
Try to avoid overlapping pulses!
If your skin blisters or burns, STOP USE IMMEDIATELY!
Avoid complications after use of SensEpil™ by beurer!
Do not expose treated areas of skin to the sun!
Sun exposure includes unprotected exposure to direct sunlight of over 15 minutes constantly, or unprotected exposure
to diffuse sunlight of over 1 hour constantly.
To protect recently treated skin when exposed to sunlight, be sure to thoroughly apply sunscreen SPF 30 or higher, for
2 weeks after each hair removal session.
Always shave the area to be treated and make sure that the skin is clean and dry before using the SensEpil™ by beurer.
Cover birthmarks and tattoos before SensEpil™ by beurer application.
Cover dark brown or black spots, such as large freckles, birth marks, moles or warts before SensEpil™ by beurer
application.
Never look directly at the light coming from the SensEpil™ by beurer
APPLICATOR and LAMP CARTRIDGE.
Do not use SensEpil™ by beurer on nipples and genitals (male or female).
Do not use SensEpil™ by beurer on any body site where you might later want hair.
Do not use SensEpil™ by beurer for any purpose other than hair removal.
Never point the SensEpil™ by beurer
APPLICATOR in an attempt to emit a light pulse into open space. Always make sure
that the
APPLICATOR is pointed at, and in full contact with the skin during application.
Remove the SensEpil™ by beurer
APPLICATOR from the skin if either the skin or the APPLICATOR is too hot.
Never use fl ammable liquids such as alcohol (including perfumes, sanitizers, or other applications containing alcohol) or
acetone to clean the skin before using SensEpil™ by beurer.
Use of SensEpil™ by beurer may cause temporary pigmentation changes (See “Possible Side Effects” below).
Keep this device out of the reach of children. Do not use SensEpil™ by beurer on children or allow children to use it.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer HL 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer HL 100 in the language / languages: English, German as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info