620015
39
Zoom out
Zoom in
Previous page
1/44
Next page
39
To replace a DISPOSABLE LAMP CARTRIDGE:
1. Press the POWER ON/OFF SWITCH to turn SensEpil™ by beurer off.
2. Unplug the power cord from the electrical outlet.
3. Grasp the used
DISPOSABLE LAMP CARTRIDGE on both sides, pull it out of the socket and
discard with normal trash.
4. Unwrap a new
DISPOSABLE LAMP CARTRIDGE.
5. Push the new
DISPOSABLE LAMP CARTRIDGE gently into place.
If correctly installed, the DISPOSABLE LAMP CARTRIDGE will spring back when pushed in and
released.
Note: A DISPOSABLE LAMP CARTRIDGE should also be replaced if large spots appear inside it or if
its LENS is broken.
Do not attempt to open or repair your SensEpil™ by beurer device.
Opening SensEpil™ by beurer may expose you to dangerous electrical components and to pulsed light energy, either of which
may cause serious bodily damage and/or permanent eye injury.
Trying to open SensEpil™ by beurer may also damage the device and will void your warranty.
12.2. “A light pulse is not emitted when I press the PULSE SWITCH
Make sure that you have good contact with the skin and that the APPLICATOR TIP is evenly and fi rmly pressed to the skin. For your
safety, the
PULSE BUTTON will activate a pulse only if the APPLICATOR TIP is fi rmly pressed against the skin.
Check the
CONTROL PANEL. If the SKIN TONE WARNING INDICATOR LIGHT blink for 3 seconds, this is an indication that your skin tone,
measured by the
SKIN COLOR SENSOR, is too dark for safe application. Try using the device on a different body part or contact
the SensEpil™ by beurer support.
Check the
REPLACE CARTRIDGE INDICATOR LIGHT. If it is on, disconnect SensEpil™ by beurer and replace the DISPOSABLE LAMP
CARTRIDGE.
Make sure that the
READY INDICATOR is on.
z
If within 10 seconds the READY INDICATOR remains off turn SensEpil™ by beurer off and back on by pressing the POWER
ON/OFF SWITCH twice.
Check the
SYSTEM WARNING INDICATOR LIGHT.
If the light is on turn SensEpil™ by beurer off and back on by pressing the
POWER ON/OFF SWITCH twice.
12. Troubleshooting
12.1. “My SensEpil™ by beurer does not start”
Make sure the power cord is properly connected to the SensEpil™ by beurer device.
Make sure the power cord is plugged into an electrical outlet on the wall.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer HL 100 SensEpil at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer HL 100 SensEpil in the language / languages: English, German as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info