715873

Beurer HK 67 To Go Manual

14
Zoom out
Zoom in
Previous page
1/68
Next page
14
– The flashing sequence of the white LED display on the powerbank indicates the charging status of the
powerbank when charging and running down:
1 x flash: 0 – 25%
2 x flashes: 26 – 50%
3 x flashes: 51 – 75%
4 x flashes: 76 – 99%
Permanently illuminated: 100%
– As soon as the LED display on the powerbank lights up permanently white, the powerbank is fully charged
(after approx. 4.5 hours from empty).
– The white LED display on the powerbank goes out shortly after the powerbank has been disconnected
from the USB charger.
– The powerbank should be charged at least once a year to retain its capacity.
– Do not cover the powerbank with covers, cushions or similar during the charging process in order to
prevent overheating.
– Only charge the powerbank in a dry environment and at normal room temperature.
4.3 Charging a smartphone via powerbank
The powerbank can be used for more than just operating the
heating pad – it can also be used to charge the battery of a
smartphone. To charge your smartphone using the power-
bank, proceed as follows:
• Connect the powerbank to your smartphone using the
original USB charging cable from your smartphone manu-
facturer.
4.4 Operating the heating pad
• Place the heating pad on your stomach or back. Then guide the long, elastic rubber strap around your body
and secure the heating pad with the hook-and-loop fastener.
• Place the charged powerbank (1) into the integrated pocket on the heating pad (2).
• Then insert the connector plug for the connection cable (4) of the heating pad into the connection socket
on the powerbank. The LED display of the On/Off button (3) on the heating pad briefly lights up white three
times. The heating pad is now ready for use.
IMPORTANT
Ensure that the heating pad will not bunch up or become folded during use.
4.5 Switching on
• Press the On/Off button (3) to switch on the heating pad (2). The LED display of the On/Off button lights
up green (minimum heat). The LED display of the powerbank (1) illuminates or flashes white according to
the charge status of the powerbank.
• If you press the On/Off button again, the temperature setting will increase (medium heat). The LED display
of the On/Off button lights up yellow.
• If you press the On/Off button again, the heating pad switches to the maximum temperature setting (maxi
-
mum heat). The LED display of the On/Off button lights up red.
• If you press the On/Off button again, the heating pad switches off. The LED display of the On/Off button
goes out immediately and the LED display on the powerbank goes out after a few seconds.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer HK 67 To Go at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer HK 67 To Go in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 4,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info