715873
13
Zoom out
Zoom in
Previous page
1/68
Next page
13
When using a USB mains part, the socket used must always be easily
accessible, so that the USB mains part can be disconnected from the
socket quickly in a hazardous situation. For more information, please
see the instructions for use of the USB part.
Risk of explosion!
Incorrect handling of batteries can lead to fire,
explosions, leakage of hazardous substances or other hazardous situ
-
ations! Do not throw the powerbank into fire, as the integrated battery
could explode.
Do not disassemble, split or crush the rechargeable batteries.
Only use chargers specified in the instructions for use.
Batteries must be charged correctly prior to use. The instructions
from the manufacturer and the specifications in these instructions for
use regarding correct charging must be observed at all times.
Always observe the notes on operation (section 4), cleaning and
maintenance (section 5) and storage (section 6).
If you should have any questions about using our devices, please
contact our Customer Services department.
3. Intended use
IMPORTANT
This heating pad is only designed to warm up the human body.
This heating pad is suitable for personal use only, not for medical or commercial purposes.
4. Operation
4.1 Safety
IMPORTANT
The heating pad is fitted with a SAFETY SWITCH-OFF. The safety system prevents overheat-
ing of the heating pad through automatic switch-off in the event of an error. Once the SAFETY
SWITCH-OFF has taken place, the On/Off button on the heat pad (3) and the white LED display
on the powerbank (1) that is shown when switched on remains illuminated. After cooling, the
heat pad switches on again automatically.
4.2 Charging the powerbank
IMPORTANT
Before you begin charging the powerbank (1), please note the information in section 2 “Important
information”.
The powerbank must be charged fully prior to initial use or if the device has not been used for a long
period. If the powerbank is completely run down, the charging process will take approx. 4,5 hours
until it is fully charged again. To charge the powerbank fully, proceed as follows:
Insert the charging cable (5) provided into the connection socket of the powerbank.
Connect the other end of the charging cable to a USB charger via the USB port (USB charger with 5V / 1A
SELV in accordance with the requirements of IEC/EN 60335, not included). Whilst charging, the LED display
on the powerbank flashes white.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer HK 67 To Go at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer HK 67 To Go in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 4,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info